MTM Hydro

NEW MTM Hydro 14.7022 PF22.2 Professional Foam Cannon Adjustable Air Intake and Fan with New Bottle Design Stands Up On Its Own. The MTM Hydro Foam Cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam

Features:
• Adjustable Spray Pattern (horizontal or vertical)
• Adjustable Fan Blades (jet-wide)
• Adjustable chemical injection knob
• Single cast plated brass body
• New stand up bottle
• Replaceable filter
• M22 and QC plug fittings included
• Approved For auto, RV, marine detailing agriculture and home cleaning

Note:
• The 1.1mm (3.0) nozzle will accommodate a variety of pressure washers typically in the lower GPM/PSI spectrum. The 1.1mm orifice will fit most residential pressure washers much more accurately than the installed 1.25mm (3.5) orifice and provide better foam from your MTM Foam Cannon
• The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit
• Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice
• For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass
• You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine
• MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice
• Additional orifice sizes and replacement items available for purchase

Specifications:
• Min. Flow Rate: 1.4 GPM
• Max. Flow Rate: 5.3 GPM
• Min. Pressure: 1,100 PSI
• Max. Pressure: 5,000 PSI
• Max. Temp.: 140°
• Nozzle Size: #3.5 / 1.25mm (Installed), #3.0 / 1.10mm included
• 32oz Grey stand up bottle
• Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
• Weight: 1.10 lbs.

MTM Replacement 32oz Bottle - PF22.2

1/8” Stainless Steel Rotating Sewer Jetter Nozzle, # 4.5. Do not have a forward spraying orifice, but have 3 orifices angled backwards and to the side. Better for removing build up from the walls of the pipe or tube.

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/8” Stainless Steel Rotating Sewer Jetter Nozzle, # 5.5. Do not have a forward spraying orifice, but have 3 orifices angled backwards and to the side. Better for removing build up from the walls of the pipe or tube.

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Rubber Nozzle Holder Grommet

• Side Handle For 1/4" Lance W/ Brass Nut
• Replaces #12.0058

MTM Hydro 24.0101 Stainless Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Stainless Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 6,000 PSI
• Wight: 0.31 lbs