Propulse 6,000 PSI Grey “mark-less” 6' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.
Features:• Suitable for cold and hot water commercial pressure cleaning applications• Reinforcement: Two layers of high tensile braided steel – R2 Rating• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color• Burst (Minimum): 3:1 working pressure • Impulse Life: 200,000+
Specifications: • Hose Inner Diameter: 3/8" ID• Length: 6’• Working (Maximum): Up to 6,000 PSI• Burst (Minimum): 18,000 PSI• Color: Grey, “mark-less”• Maximum Temperature: 212° F.• Ends: 3/8" MPT (1 solid & 1 swivel)• Weight 2.15 lbs
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Specifications: • Hose Inner Diameter: 3/8" ID• Length: 4’• Working (Maximum): Up to 6,000 PSI• Burst (Minimum): 18,000 PSI• Color: Grey, “mark-less”• Maximum Temperature: 212° F.• Ends: 3/8" MPT (1 solid & 1 swivel)• Weight 1.45 lbs
General Pump D11009 Quick Disconnect Coupler Plug Hardened Steel Zinc Plated 3/8” x 3/8" NPT-M 4,000 PSI
Features: • Quick disconnect design• Hardened Steel Zinc Plated
Specifications: • Quick Disconnect Coupler: Plug• Body Material: Hardened Steel• Plug Size: 3/8"• Thread: 3/8” NPT-M• Max Temp: 175°• Max Operating Pressure: 4,000 PSI• Replaces QCP2MS• Weight: 0.10 lb
Specifications: • Hose Inner Diameter: 3/8" ID• Length: 2’• Working (Maximum): Up to 6,000 PSI• Burst (Minimum): 18,000 PSI• Color: Grey, “mark-less”• Maximum Temperature: 212° F.• Ends: 3/8" MPT (1 solid & 1 swivel)• Weight 1.00 lbs
General Pump 15° (Yellow) #5.5 Quick Connect (Q) Spray Nozzle
Features• 5,000 PSI operating pressure• Made in the USA• Ceramic insert is resistant to wear• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles• Stainless steel housing resists cracking and wear• Resistant to most chemical• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle• Laser marked for clarity and durability
Specifications• Tip Angle: 15° (Yellow)• Nozzle Size: 5.5• Operating Pressure: 5,000 PSI• Connection: 1/4” QC Plug• Weight: 0.05 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart