Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 10.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Offers 0° Impact, but with a 25° pattern
• Unique internal stabilization spring design allows for aim & shoot operation
• Nozzle can be pointed in any direction
• Shock resistant ceramic
• High Strength forged brass housing
• Durable rubber cover

Specifications
• Nozzle Size #6.0
• Max PSI: 5,100
• Max GPM: 9.9
• Max Temp.: 212° F
• Inlet: 1/4" FPT
• Minimum for operation: 2.4 GPM at 2,600 PSI
• Weight: 1.0 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

Mecline AL55 Easy Pull Trigger Gun. Designed with an easy pull trigger, this gun can be operated without high levels of fatigue or discomfort normally found in other high pressure guns

Features:
• Anti-shock plastic shells
• Ball and seat in stainless steel
• Gun body in forged brass
• Very easy for the assembly operation
• Spring assisted trigger
• Ergonomic hand grip
• Minimum force required for trigger pulling
• Safety lock red color

Specifications:
• Permissible Pressure: 5,075 PSI
• Rated Pressure: 4,500 PSI
• Max Flow: 12.0 GPM
• Max Temp: 320° F.
• Inlet: 3/8" NPTF
• Outlet: 1/4" NPTF
• Replaces the AL36
• Weight: 18.2 oz