Propulse Hot Clean 6,000 PSI 3/8" x 50' Black Rubber Hose. The next level of hot water pressure washer hose. Designed for high flow (up to 8 GPM) heavy duty hot water cleaning applications. Rubber construction throughout, with a double layer of steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 50’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Black
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 15.5 lbs

General Pump 3/8" 5,000 PSI Stainless Steel Quick Disconnect Fittings (1 Plug & 1 Socket)

Features:
• Quick disconnect design
• Body Material: 304 Stainless steel
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler socket with EPDM O-ring
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler plug
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Works with standard quick connects
• Weight: 0.30 lb

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual I.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 24.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 35.0 lb.

Annovi Reverberi AR64545 4.5 oz Axial Pump Crankcase Oil is formulated for AR pump models XJV, RMV, RMW, SJV, SJW and XJW radial axial pumps

Specifications:
• Special blend, non-detergent crank case lubricating oil
• Exceeds wear prevention requirements of all major hydraulic pump mfg's
• Contains anti-wear, rust inhibitor and deoxidizer additives
• Packaged in 4.5 oz bottles
• Weight: 0.30 Lbs