General Pump 25° x #5.5 M-Style Spray Nozzle 1/4” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 25°
• Nozzle Size: 5.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Fimco 2.1 GPM 60 PSI Gold Series 5277995/5275814 High-Flo Duplex 12 Volt Diaphragm Pump with Internal Bypass and 3/8" FPT (Threaded) Ports. Replacement pump for spot sprayers, liquid fertilizer units, planters or back up water systems. Can also be used for potable water. Ready for Roundup®

Features:
• RELIEF VALVE MODELS have pressure controlled by an internal relief valve, and run continuously unless electric current is turned off
• Diaphragm design eliminates troublesome shaft seal
• Pump can be run indefinitely without damage
• Ball bearing drive - assures longer pump life
• Excellent self-priming capability
• Santoprene diaphragms and viton valves are standard
• Maximum temperature of pumped liquid 130°F
• Permanent magnet motor - long life brushes
• Fuse protected
• Built-in cooling fan

Specifications:
• Voltage: 12 VDC 8 AMPS Max
• Max Flow: 2.1 GPM
• Max Pressure: 60 PSI
• Ports(2): 3/8” Female NPT
• Two Pin Connector: 6” Long
• Fimco Box #: 5275814
• Fimco Pump #: 5277995
• DO NOT USE With Flammable Or Combustible Liquids
• Packaging: Small box
• Weighs 3.15 lbs

Fimco 5277995/5275814 Pump Breakdown

General Pump 15° x #5.5 M-Style Spray Nozzle 1/4” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 15°
• Nozzle Size: 5.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart