HydroKem™ HPB is formulated to provide a clinging foam loaded with proprietary surfactants that are safe to use on most surfaces. Our pro-prietary surfactant blend also will combine readily with bleach to further enhance the cleaning and mold/algae cutting performance. HPB is a highly active cleaner without the harsh corrosives associated with other high pressure formulas.
CHARACTERISTICS:
HydroKem™ HPB is green in color with a crisp green-apple fragrance that helps mask the odor of bleach very nicely when properly mixed.
HydroKem™ HPB can be pre-diluted and brushed on, applied with a foamer, or injected directly through a downstream chemical injector,
Product was designed for use with a professional foamer. Application with a foamer will yield best results. HydroKem™ HPB rinses freely without leaving residue behind.
INSTRUCTIONS:
Dilutions will vary depending on the type of soil being cleaned. When used with bleach we recommend using the mixture within one hour for best results. While our product is stable in bleach, the bleach will begin to lose its strength as soon as it is diluted.
APPLICATION:
Apply with a professional foamer is recommended for best re-sults. Begin with a ratio of 20:1. Heavier soil or exceptionally hard water may require higher concentrations of HPB. Results always improve when applied with hot water. DO NOT allow the cleaner to dry on the surface.
Apply all cleaners from the bottom of your work up to minimize waste and allow for the most dwell time. When washing also wash from the bottom up to make best use of the chemical that is on the surface. Rinse from the top down.
DO NOT MIX HYDROKEM HPB WITH OTHER CLEANERS
This product is safe to use with bleach but it DOES NOT make bleach safe! Bleach is considered a corrosive product. This product becomes a corrosive when mixed with bleach.
