General Pump YU21405 green spring trapped pressure unloader valve. At gun opening, the water flows through the valve which maintains the system in pressure until the gun closes, the interruption of the flow provokes the complete aperture of the bypass which allows to discharge the flow at low pressure.
Featuring: • NEW improved design!• Reduced pressure loss • Makes for easier gun operation• Extremely reliable• Easy maintenance• Made In USA
Data Sheet
Specifications:• Spring Color: Green• Permissible Pressure: 4,500 PSI• Rated Pressure: 4,050 PSI • Rated Flow Rate: 21.0 GPM• Rated Temperature: 195° F• Inlet Ports (2): 1/2" NPT F• Outlet Port: 1/2” NPT F• Bypass Port (2): 1/2” NPT F• GP2124• Weight: 2.60 lb
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump D10079 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-M 6,000 PSI
Features: • Quick disconnect design• 304 Stainless steel
Specifications: • Quick Disconnect Coupler: Plug• Body Material: 304 Stainless steel• Plug Size: 3/8"• Thread: 3/8” NPT-M• Max Temp: 175°• Max Operating Pressure: 6,000 PSI• Replaces QCP2MSS• Weight: 0.11 lb
General Pump D10078 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-F 6,000 PSI
Specifications: • Quick Disconnect Coupler: Plug• Body Material: 304 Stainless steel• Plug Size: 3/8"• Thread: 3/8” NPT-F• Max Temp: 175°• Max Operating Pressure: 6,000 PSI• Replaces QCP2FSS• Weight: 0.09 lb
General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer
Features• 20% injection draw rate• Made in the USA• A cost effective solution to your chemical application needs
Injector Specifications:• Size: # 2.1 mm (3.0 to 5.0 GPM)• Max Operating Pressure: 4,500 PSI• Max Temperature: 195° F• Inlet: 3/8” NPT-M• Outlet: 3/8” NPT-M • Chemical Port: 1/4” Hose Barb• Materials: Brass, Stainless Steel, Viton • Note: If between sizes, choose the smaller injector size• Weight: 0.30 lbs
Features• For use when high and low pressures are needed• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure
Specifications• Max Pressure: 4,000 PSI• Max Flow: 8.0 GPM • Max Temp: 195° F.• Inlet: 1/4" Female NPT• Outlets (2): 1/4" Female NPT• Weight: 6.1 oz. • Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included