3/8” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI
Features:• High Quality, German engineered components• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage• The sharp edges cut, break and penetrate through every kind of blockage• Made out of wear-resistant, hardened stainless steel• Centric jet is plugged• 3 Lateral front jets with nozzle inserts• 6 Rear jets with nozzle inserts• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:• Penetration of completely clogged pipes• Opening of root masses• Opening of frozen pipelines• Hydraulic thrust boring flushing operations
Specifications:• Nozzle Size: # 7.0• Material: Stainless steel• Maximum Pressure: 5,076 PSI• Inlet: 3/8” Female• Outside Diameter (O.D.): 1.11”• Weight: 4.0 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
3/8” Suttner ST-49 Stainless Steel Rotating Sewer Jetter Nozzle, # 18.0. With centric front jet and 3 orifices angled backwards and to the side. Slides easily into drain pipes and sewer lines. Front jet for penetrating of clogged pipes and frozen pipelines and rear jets for flushing debris or clearing sides of pipes while attached to sewer hose
Features• High Quality, German engineered components• 1 Centric front jet breaks up clogs & debris• 3 Backward ports drive the nozzle forward and flush debris• Rotating style adds extra agitation and surface cleaning• Corrosion resistant stainless steel and brass construction
Specifications • Inlet: 3/8” Female• Nozzle Size: # 18.0• Material: Stainless steel & brass• Maximum Pressure: 4,000 PSI• Outside Diameter (O.D.): .94”• Weight: .15 lb
1/4” Suttner ST-49 “Grease Ball” Sewer Nozzle # 8.0, 8 Rear 7,252 PSI.
Features• High Quality, German engineered components• 8 Rear jets 0.6 mm for extreme thrust and highest wall coverage of the pipe• Designed for the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes, too• Nozzle drilling as stepped bore for best protection against mechanical impact• Hardened stainless steel • Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 8.0• Material: Stainless steel• Maximum Pressure: 7,252 PSI• Inlet: 1/4” Female• Outside Diameter (O.D.): .97” • Length: .84” • Weight: .08 lb
1/4” Suttner ST-49 “Predator” Sewer Nozzle # 4.5, 1 Front, 3 Rear 7,252 PSI.
Features• High Quality, German engineered components• Due to its conical front design this is the ideal solution to make its way through tight bends and traps• 3 Rear jets for maximum thrust and powerful cleaning impact• Front jet to blast through roots and scale or de-icing• Hardened stainless steel • Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 7,252 PSI• Max Flow: 6.6 GPM• Inlet: 1/4” Female• Outside Diameter (O.D.): .86” • Length: 1.69” • Weight: .13 lb
1/4” Suttner ST-49 “Root Ram” Sewer Nozzle # 5.5, 1 Front, 3 + 3 Back 7,252 PSI.
Features• High Quality, German engineered components• Equipped with 1 front jet, 3 rear jets (30°) for maximum thrust and 3 additional nozzles (45°) right behind its nose for better cleaning results and wall coverage the nozzle has proven to be ideal on root chokes• Hardened stainless steel • Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 5.5• Material: Stainless steel• Maximum Pressure: 7,252 PSI• Max Flow: 7.9 GPM• Inlet: 1/4” Female• Outside Diameter (O.D.): .86” • Length: 1.46” • Weight: .08 lb