Annovi Reverberi - AR North America

AR Blue Clean AR70064 is a replacement Unloader and TSS module made for direct fit to the AR630TSS, AR630TSS-HOT, and the AR767 models

This assembly comes prebuild as a complete unloader and TSS Module, ready for install. Simply disconnect your current TSS from the wire harness, remove and replace your current Banjo bolts, and you are up and running again.

This assembly is hassle free and can save you hours should you need to quickly get up and running.

Superseded Prod: AR22620

What's included in the Kit:
• Replacement Banjo Bolts (2)
• Replacement TSS Module w/ wire harness
• Replacement Unloader 0-Rings (2)
• Minimatic Unloader. Upper and Lower
• Replacement (Fixed) Chemical injector Nipple
• Replacement Two Part Unloader Knob

Warning:
• Pressure systems are dangerous. If you have any questions regarding this replacement module please AR Blue Clean directly

AR2360750 Micro Switch for AR630TSS models

The Annovi Reverberi XMA25G18E-F33, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA25G18E-F33 can produce up to 1800 Max PSI, 2.5 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA25G18E-F33 weighs in at 15 lbs and boasts a sleek compact design

• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 3.0 EBHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 15.0 lb

The AR 5950 Cart Assemblies simplify building of gas or electric pressure washers.

Check the needed size to fit the pump/motor combination used, then select the cart size that it
will best fit on.

Use the pre-drilled holes, or modify the cart for custom applications

Platform: 14.75” L x 10.75” W

Tires: 10”

Color Black

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 8.3 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 10.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass nickel plated head & valve coversi
• Solid ceramic plungers
• Replaces RKA4.8G30E-F17
• Weight: 22.0 lb

Bolt-On Unloader Fits AR SXMA, SXMV, XM, XMA, XMV, XR, RK, RKA, RKV, RR, RRA, RRV Pumps

Specifications:
• Maximum Pressure: 3,650 PSI
• Max. Volume: 5.5 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body
• Built-In bypass channel
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Injector Size: 1.8 (3.0 - 4.0 GPM)
• 2.5 lbs. Weight