Comet Pump

Comet Piston Kit 20mm FW, HW
Replaces Comet Kit # 2409.0074.00

Comet Packing Kit 18mm TW

Replaces Comet # 5019.0653.00

Comet 10001-02016 Repair Kit for MC25 Diaphragm Pump. Works on the Comet MC25, MC25GR34, and MC25-115V Diaphragm Pumps

Kit includes:

2 Buna Diaphragms (# 1800.0020)

1 Accumulator Diaphragm (# 1800.0033)

4 Valve Assemblies with O-Rings (# 1212.0004)

4 Silicone O-Rings (# 1210.0052)

Replaces Comet Kit # 5026.0347.00

Comet BXD 2525G, BXD2525G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.0 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1001.00
• Weight: 11.0 lb.

Comet Seal Kit, Hot Water SW 20mm

Replaces Comet # 5019.0670.00

Comet DWD-K 2530 G 3,000 PSI 2.3 GPM Commercial Duty Triplex Plunger Pump Fully Plumbed with Adjustable Unloader and Chemical Injector

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Forged brass manifold and ceramic plungers to prevent pitting and wear
• Built-in unloader and chemical injector for quick plug and play on systems
• Lubricated double seal packings to increase pump longevity (high & low)
• Anodized crankcase to protect from the harshest elements
• Ceramic Plungers
• Stainless steel check valves to keep pump at optimal performance.
• Featuring a 3/4” hollow shaft with flange for coupling to gas engines.

ADDITIONAL FEATURES OF PLUMBED MADE READY PUMP:
• 3 Foot soap hose with filter
• 3/8” QC plug
• Thermal relief valve
• Garden hose adapter with spring

Comet DWD G-K Data Sheet

Specifications:
• Max. Volume: 2.3 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.3 GHP
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: 22M-14 Male Twist Connect with 3/8" QC Plug
• Note: Optional D10088 3/8" QD Coupler shown below
• Weight: 11.55 lb.

Comet BXD 3025G, BXD3025G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.8 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.4 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1005.00
• Weight: 11.0 lb.

Comet BXD 2527G, BXD2527G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,700 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.9 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1002.00
• Weight: 11.0 lb.

Comet Viton Water Seals 15mm LW, ZW

Replace Comet # 5019.0051.00

Comet Packing Kit 22mm TW

Replaces Comet # 5019.0654.00

Comet AXD 2524G-T, AXD2524GT Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,400 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.45 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Stainless steel plungers
• Replaces Comet # 6501.0050.00
• Weight: 13.0 lb.

Comet Packing Kit 25mm TW

Replaces Comet # 5019.0655.00

Comet 42001-00107 Pressure Regulator for APS41 and APS41AP

Port Sizes: two 3/8" ball valve outlets and a 3/8" hose barb bypass

With pressure gauge, adjustable pressure knob, and manual dump lever

Replaces # 1204.0564.00

Comet AXD 2527G, AXD2527G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.2 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0025.00
• Weight: 13.0 lb.

Comet 42001-00186 Group Body Kit for P40

Replaces 1204.0712.00

Comet AXD 3025G, AXD3025G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0006.00
• Weight: 12.0 lb.

Comet AXD 3020G, AXD3020G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.7 GPM
• Max. Discharge Pressure: 2,000 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.0 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0005.00
• Weight: 13.0 lb.

Comet Viton Water Seals 18mm LW

Replace Comet # 5019.0050.00

Comet 5026.0419.00 P40 Diaphragm & Valve Ordinary Maintenance Kit

Kit includes:

3 Diaphragms (# 1800.0020)

6 Valve Assemblies with O-Rings (# 1220.0105)

6 O-Rings (# 1210.0506)

Replaces Comet # 5026.0419.00