Comet Pump

Comet Hot Water Seals 20mm FW, HW

Replace Comet # 5019.0054.00

• Comet Check Valve Kit LW, ZW, FW2, HW, RW & SW
• Not for ZWD-K MODELS 3538G, 4042G, 4042S
• Replaces Comet Kit # 5025.0011.00

Comet Seal Kit, Water TW 18mm

Replaces Comet # 5019.0645.00

Regulator Unloader Valve Assy - Replaces 1215.0585.00, 1215.0271.00, 1215.0402.00

Comet Standard Mounting Rail Kit RW

Replace Comet # 5011.0229.00

• Comet Premium RW 5535 S Series Triplex Plunger Pump
• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Right hand standard
• Replaces Comet # 6517.1300.00
• Weight: 27.0 lb.

Comet BXD 2525G, BXD2525G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.0 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1001.00
• Weight: 11.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.1300.00
• Weight: 13.4 lb.

Comet LW 3525 S 2,500 PSI 3.5 GPM Pump

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

Replaces Comet # 6300.0800.00 & 6300.0810.00

Comet Piston Kit 20mm FW, HW
Replaces Comet Kit # 2409.0074.00

Comet ZWD4040G Industrial Duty Pump. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. We do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz
• Replaces Comet # 6305.0900.00
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 17.5 lb.

Comet Piston Seal Kit , VRX

Replaces Comet # 5026.0256.00

Comet BXD 2527G, BXD2527G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,700 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.9 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1002.00
• Weight: 11.0 lb.

Comet Oil Level Plug - Replaces 3201.0019.00 & 3201.0025.00

Comet Premium RWS 6040 S Series Triplex Plunger Pump

• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 6.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Right hand standard
• Replace Comet # 6518.0801.00
• Weight: 27.0 lb.

Comet Water Seal Kit, 18mm, 4000 PSI

Replaces 5019.0631.00 & 5019.0247.00

Comet Premium Pump Oil (32 oz)

• For diaphragm and high pressure plunger pumps
• Specially formulated non-detergent and non-foaming oil
• Rated for superior rust and oxidation protection
• Packaged in 32 oz bottles
• Bottle Color: Black or White
• Weight: 2.0 Lbs.