Comet Pump

Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” QC Plug x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 80 Mesh Screen
• SST w/Brass Insert

Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" QC Plug
• Outlet: 1/4" MPT
• Weight: 0.20 lbs.

Comet P40-GR Soft Wash Pump with Gear Box and Regulator. Unit delivers 11 GPM and up to 300 PSI. Compatible with Aggressive Softwash Chemicals

Features:
• Self-priming pump delivers pressures up to 300 PSI and flowrates of 11.0 GPM, allowing you to reach roof tops and second story siding, and perform quick rinses
• Features Duraphragm™ Technology extends the life of the diaphragms by shielding them from direct contact with the chemical inlet. This spreads inlet vacuum, often caused by a dirty suction filter or kinked hose, across the entire surface of the diaphragm instead of ocusing it on the one small area where most failures occur
• Chemical Resistant Wet Parts Compatible with Aggressive Softwash Chemicals
• Hexagonal Manifolds for Smooth and Quiet Operation
• Injection Molded Plastic Parts with UV Stabilization
• Secure Bracket System to Prevent Manifold Leaks
• Includes gear box and pressure regulator
• Fits standard engines with 3/4” keyed shaft

Specifications:
• Max Flow 11.0 GPM
• Max Pressure: 300 PSI
• Includes Gear Box and Pressure Regulator
• 3/4” Hose barb pressure outlet, 3/8”.hose barb bypass
• NOTE: THESE UNITS ARE DESIGNED TO BE FLUSHED IMMEDIATLEY AFTER EACH USE
• Dimensions: 16” L x 13” W x 14” H
• Replaces 6518.0003.00 & 6122.0008.00 (P36-GR)
• Weight: 25.6 lb.

Comet APS41 High Pressure Diaphragm Pump 10.8 GPM 580 PSI with gear reduction for gas engines with 3/4" shafts. The Comet APS41 is a high pressure, 3-diaphragm semi-hydraulic pump that is best used for lawn care, pest control, hydrostatic testing, and for horticultural and agricultural spraying

Specifications:
• Max Flow: 11 GPM
• Max Pressure: 580 PSI
• Max RPM: 550
• Port Sizes: 1" HB inlet, 1/2" HB outlet
• Gear Reduction: for gas engines with 3/4" shafts (5 to 6.5 hp engines)
• Pump Shaft Rotation: CW or CCW
• Diaphragms: 3, semi-hydraulic, Buna standard
• Housing: Anodized aluminum
• Head: Aluminum with plastic coating
• Recommended pressure regulator (not included): 1204.0564.00
• Max. Fluid Temperature: 140° F
• Pump Only Weight: 22.0 lbs

Replace Comet # 6114.0048.00

Comet Premium TW 4570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 4.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

Comet Premium TW 5070S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

Comet Premium TW 5570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.8 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

Comet Premium TW 13022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 12.8 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.2400.00
• Weight: 45.0 lb.

Comet Premium TW 14022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 14.1 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.2600.00
• Weight: 45.0 lb.

Comet Premium TWN 7025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6512.0200.00
• Weight: 45.0 lb.

Comet Premium TWN 8025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 8.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6512.0300.00
• Weight: 45.0 lb.

Comet Premium TWN 6036S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 6.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6512.0100.00
• Weight: 45.0 lb.

Comet Premium TW 8030S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 8.7 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1400.00
• Weight: 45.0 lb.

Comet Premium TW 8030S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 8.7 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1401.00
• Weight: 45.0 lb.

Comet Premium TW 10025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 10.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1000.00
• Weight: 45.0 lb.

Comet Premium TW 11025S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 11.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1201.00
• Weight: 45.0 lb.

Comet Premium TW 7036S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.0700.00
• Weight: 45.0 lb.

Comet Premium TW 8036S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 8.6 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.0902.00
• Weight: 45.0 lb.

Comet Premium TW 8040S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 8.6 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1700.00
• Weight: 45.0 lb.

Comet Premium TW 4070S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 3.9 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Replaces Comet # 6513.1801.00
• Weight: 45.0 lb.

Comet Premium TW 4070S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Replaces Comet # 6513.1800.00
• Weight: 45.0 lb.

Comet Premium TW 3570S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Replaces Comet # 6513.2000.00
• Weight: 45.0 lb.

Comet 4,000 PSI Quick Connect 2.5" Pressure Gauge Kit. It can be easily put in line with the quick connect ends and used to monitor/set/test your pressure washer

Specifications:
• Accurately view pressure for all units up to 4,000 PSI
• Casing: 2-1/2" Diameter
• Window: Acrylic
• Case Material: Stainless steel
• Fill Material: Glycerin (liquid)
• 3/8 Quick connects for easy mounting
• Max. Pressure: 4,000 PSI
• Weight: 0.80 lbs

Kit Components:
• 4,000 PSI 2.5” stainless steel pressure gauge
• 4,000 PSI Brass and stainless steel 3/8” quick disconnect gauge fitting
• Note: Assembly with Teflon tape is required

Comet Pump 18” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet

Specifications
• Length: 18"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 0.85 lbs

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 5.3 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT
• Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0806.00
• Weight: 13.4 lb.

• Comet LWD2020E-K Triplex Plunger Pump with Built-In Unloader and Chemical Injector
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Port: 1/2" NPT
• Discharge Port: 3/8" NPT
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0156.00
• Weight: 13.4 lb.

• Comet Jetter Valve
• Valve disabler pulse valve with adjustable lever
• Use with Comet series pumps RW, & TW Up to 3,600 PSI
• Pulsating action for sewer cleaning is created by replacing the pump valve cap
• Equipped with an adjustment lever
• Increases effectiveness of sewer hose and nozzles
• Replaces Part Kit # 0608.0036.00

• Comet Jetter Valve
• Valve disabler pulse valve with adjustable lever
• Use with Comet series pumps TW Over 3,600 PSI
• Pulsating action for sewer cleaning is created by replacing the pump valve cap
• Equipped with an adjustment lever
• Increases effectiveness of sewer hose and nozzles
• Replaces Part Kit # 0608.0037.00

Comet Premium TWS 8035S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 8.3 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6514.0600.00
• Weight: 45.0 lb.

Comet Seal Kit, Water FW2 18mm

Replaces Comet # 5019.0218.00

Comet Valve Kit

Replaces 2409.0154.00

INJECTOR BODY KIT

Replace Comet # 3410.0318.00

Comet FWS2 3530 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.5 BHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6411.0100.00
• Weight: 19.6 lb

Comet Check Valve Kit BXD

Replaces Comet # 5025.0027.00

Comet FW2 5530 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.0 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6410.0500.00
• Weight: 19.4 lb

Comet FWS2 3530 E Direct Drive Pump with Electric Flange NEMA 184T. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 7.5 EHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6411.0101.00
• Weight: 20.3 lb

Comet Valve Cap with O-Ring, ZWD

Replace Comet # 3202.0315.00

Comet FWS2 5040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.18 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6411.1200.00
• Weight: 19.6 lb

5 pc Fitting Kit - Bayonet & Twist Style. Includes 4 of the most common styles of bayonet fittings and one 22mm twist connect fitting

Fittings:
• Bosch bayonet style pressure washer fitting
• Lavor bayonet style pressure washer fitting
• KEW / Alto bayonet style pressure washer fitting
• 22mm-14 Twist coupler plug - Briggs Power Products, Brute, Craftsman, Delta, DeVilbiss, Excell, Generac, John Deere, Karcher, Ryobi, Troy-bilt
• Karcher K Series brass bayonet style pressure washer fitting

Specifications:
• Material: Brass
• Inlet: 1/4” Female NPT
• Max Pressure: 2,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• Weight: 0.75 lb

Comet Seal Kit, Water BXD-G

Replaces Comet # 5019.0667.00

Comet Oil Seal Kit AWD

Replaces Comet # 5019.0687.00

Comet Water Seal Kit AWD, AWD-K, BWD & BWD-K

Replaces Comet # 5019.0686.00

Comet Check Valve Kit

AWD-K 3030G, AWD-K 3530G, AWD-K 4030G, AWD-K 4036G

BWD-K 2527G, BWD-K 3027G

ZWD-K 3538G, ZWD-K 4042G, ZWD-K 4042S

Replaces 5025.0049.00 & 5025.0030.00

OiL Cap BXD, Replaces # 3200.0086.00 & 3200.0122.00

Comet Premium TWS 5550S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.6 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Replaces Comet # 6514.0100.00
• Weight: 45.0 lb.

Comet BWD-K 3027G, BWD 3027 G-K Commercial Duty triplex plunger pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Double Seal Packings (High & Low)
• Anodized Crankcase
• Ceramic Plungers
• Forged Brass Manifold
• Stainless Steel Check Valves
• 1/2” FPT Inlet – 3/8” MPT Outlet
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 7.36 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• ReplacesComet # 6521.0350.00 & 6521.0356.00
• Weight: 13.1 lb.

• Triplex Plunger Pump
• Replaces Comet ZWD3030G-K Pump
• Direct Drive with Gas Flange 7.5-11.0 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Built-In adjustable unloader with chemical injector
• Replaces Comet # 6305.1650.00.
• Weight: 17.4 lb.

Comet BXD 3020G, BXD3020G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.8 GPM
• Max. Discharge Pressure: 2,000 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.1 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1004.00
• Weight: 11.0 lb.

REGULATOR VALVE ASSY. Replaces 1215.0586.00, 1215.0393.00, 1215.0403.00