Comet Pump

• Comet LWD2020E-K Triplex Plunger Pump with Built-In Unloader and Chemical Injector (Left Handed)
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Port: 1/2" NPT
• Discharge Port: 3/8" NPT
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0161.00
• Weight: 13.4 lb.

Comet FW2 4040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.55 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6410.0700.00
• Weight: 19.4 lb

1/4 BSPM to 3/8" FNPT Brass Fitting

Comet LWD 3025 G 2500 PSI, 3.0 GPM Comet Direct Drive Pump Assembly with VR54 unloader, thermal relief valve and garden hose inlet connector. This pump has all the necessary components to make installation a breeze!!

PUMP:
• Comet LWD3025G Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE (2-9/16 center to center)
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145º F
• Brass head & valve covers
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings

COMPONENTS:
• Comet LWD3025G Triplex Plunger Pump
• Mecline VR54 adjustable pressure unloader
• Black bypass hose
• Thermal relief valve
• Inlet filter with 3/4" Female GHT
• 3/8” QC brass socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.0 lb

Comet EWD-K 4042G, EWD 4042 G-K Pump with Built-In Unloader, chemical injector, thermal valve and garden hose inlet connector. This 4, 200 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Replaces Comet # 6311.0150.10 & 6311.0162.10
• Weight: 16.10 lb

strong>
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.10 lb

The Comet STATIC 1700 Extra Gold Electric Pressure Washer with TotalStop is a complete wall mountable and portable solution. Featuring an all brass Italian built pump producing 2.2 GPM and 1,300 PSI. This packaged unit includes 65’ rubber hose, hose reel and accessories

Features:
• Manufactured in Italy
• Sturdy structure with tubular frame for wall mounting
• Equipped with a quick wall coupling system with safety lock
• Handy support for housing all the accessories
• Standard hose reel with 65’ rubber delivery hose
• Water inlet with cartridge filter
• Comet electrical pump with three axial pistons arranged horizontally with pump at the bottom and an all-metal construction without any plastic used for the structural components
• Pump with brass head on all models
• EASY-START device
• TotalStop device
• Motor thermal protection

STATIC 1700 in Action with some additional accessories on YouTube

Accessories:
• Accessory rack supplied with the high-pressure cleaner
• GC 251 gun with protection
• Bent lance, with adjustable nozzle
• Bent lance, with rotating nozzle
• Rotating brush
• Hose reel with 65’ rubber high-pressure hose
• Foam lance 1L

Specifications:
• Flow: 2.2 GPM
• Max Pressure: 1,300 PSI
• Motor: 1150V/60 Electric
• Amps: 14
• Max Temp: 145° F.
• Manufacturer's Warranty: 12 months limited parts / No labor
• Shipping Weight: 55.60 lb

Comet Pump Brass Pressure Washer Thermal Relief Valve with 3/8" Male Inlet

Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 1.5 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

Comet Pump Brass Pressure Washer Thermal Relief Valve with 1/2" Male Inlet

Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 1/2" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

>• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

Comet Pump 12” water broom is used for cleaning vast surfaces quickly, which speeds up cleaning your driveway, deck, sidewalks, and any other surfaces. Using four nozzles, it cleans in forty percent less time than a regular nozzle!

Specifications:
• Size: 12"
• Three: # 1.3 @ 65°
• Casters: 2
• Construction: Aluminum, Steel & Stainless Steel
• Inlet Connection: 1/4 QC Plug
• Max Pressure: 4,000 PSI
• Max Flow: 3.0 GPM
• Weight 2.7 lbs.

Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” QC Plug x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 80 Mesh Screen
• SST w/Brass Insert

Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" QC Plug
• Outlet: 1/4" MPT
• Weight: 0.20 lbs.

Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” FPT x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 80 Mesh Screen
• SST w/Brass Insert

Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" FPT
• Outlet: 1/4" MPT
• Weight: 0.25 lbs.

Comet P40-GR Soft Wash Pump with Gear Box and Regulator. Unit delivers 11 GPM and up to 300 PSI. Compatible with Aggressive Softwash Chemicals

Features:
• Self-priming pump delivers pressures up to 300 PSI and flowrates of 11.0 GPM, allowing you to reach roof tops and second story siding, and perform quick rinses
• Features Duraphragm™ Technology extends the life of the diaphragms by shielding them from direct contact with the chemical inlet. This spreads inlet vacuum, often caused by a dirty suction filter or kinked hose, across the entire surface of the diaphragm instead of ocusing it on the one small area where most failures occur
• Chemical Resistant Wet Parts Compatible with Aggressive Softwash Chemicals
• Hexagonal Manifolds for Smooth and Quiet Operation
• Injection Molded Plastic Parts with UV Stabilization
• Secure Bracket System to Prevent Manifold Leaks
• Includes gear box and pressure regulator
• Fits standard engines with 3/4” keyed shaft

Specifications:
• Max Flow 11.0 GPM
• Max Pressure: 300 PSI
• Includes Gear Box and Pressure Regulator
• 3/4” Hose barb pressure outlet, 3/8”.hose barb bypass
• NOTE: THESE UNITS ARE DESIGNED TO BE FLUSHED IMMEDIATLEY AFTER EACH USE
• Dimensions: 16” L x 13” W x 14” H
• Replaces 6518.0003.00 & 6122.0008.00 (P36-GR)
• Weight: 25.6 lb.

Comet APS41 High Pressure Diaphragm Pump 10.8 GPM 580 PSI with gear reduction for gas engines with 3/4" shafts. The Comet APS41 is a high pressure, 3-diaphragm semi-hydraulic pump that is best used for lawn care, pest control, hydrostatic testing, and for horticultural and agricultural spraying

Specifications:
• Max Flow: 11 GPM
• Max Pressure: 580 PSI
• Max RPM: 550
• Port Sizes: 1" HB inlet, 1/2" HB outlet
• Gear Reduction: for gas engines with 3/4" shafts (5 to 6.5 hp engines)
• Pump Shaft Rotation: CW or CCW
• Diaphragms: 3, semi-hydraulic, Buna standard
• Housing: Anodized aluminum
• Head: Aluminum with plastic coating
• Recommended pressure regulator (not included): 1204.0564.00
• Max. Fluid Temperature: 140° F
• Pump Only Weight: 22.0 lbs

Replace Comet # 6114.0048.00

Comet Premium TW 4570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 4.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

 

Comet Premium TW 5070S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

 

Comet Premium TW 5570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.8 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.

Comet Premium TW 13022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 12.8 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.2400.00
• Weight: 45.0 lb.

Comet Premium TW 14022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 14.1 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.2600.00
• Weight: 45.0 lb.

Comet Premium TWN 7025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6512.0200.00
• Weight: 45.0 lb.

Comet Premium TWN 8025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 8.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6512.0300.00
• Weight: 45.0 lb.