Comet VRX 2524G, VRX2524G Consumer-Duty Axial Pump with built-in unloader, chemical injector, thermal relief & easy start
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In unloader with chemical injector
• Built in Easy Start
• Thermal Relief Valve
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,400 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway
Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow with Shaft Key
• Maximum Horsepower Requirements: 5.3 GHP
• Brass Head
• High Efficiency Suction-Delivery Valves
• Stainless Steel Plungers
• Aluminum Crankcase without Need of Oil Replacement
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: M22-14MM Male Twist Connect
• Weight: 7.7 lb.
Comet ZWD4040G Industrial Duty Pump. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP
Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 17.5 lb.
Comet ZWD-K 3535G Pump with Built-In Unloader and Chemical Injector. This 3, 500 PSI & 3.4 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP
Features
• Built-In adjustable unloader with chemical injector
• 1/2” FPT Inlet – 3/8” Outlet
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods
Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.82 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 14 oz
• Weight: 19.5 lb.
Comet ZWD-K 4040G, ZWD 4040 G-K Pump with Built-In Unloader, Chemical Injector and Easy Start. This 4, 000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP
Features
• Built-In adjustable unloader with chemical injector
• Built-In easy start
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.54 GHP
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: 3/8" Male NPT
• Oil capacity: 14 oz
• Weight: 19.5 lb.