Delavan Fluid Power

10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment

Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems

Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Dimension 3.75” x 5”
• Weight: 1.3 lbs

10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter & Aluminum Holder 3/4” NPT. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment

Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems

Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 3.75” x 7”
• Weight: 2.1 lbs

Delavan 90700 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90

Delavan 90600 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90

Delavan 90300 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 2.15

Delavan 90200 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 6900 series pumps
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 1.85

• Delavan Nylon 3/4" QA X 1/2" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 1/2" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 3/4" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 3/4" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 3/8" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 3/8" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 1⁄2” hollow shaft
• Rotation: CW (standard)
• Housing: Cast Iron
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Cast Iron
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

Delavan RollerPRO® 4901SS Stainless Steel Diamond Series™ 4-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 1⁄2” hollow shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

Delavan HYDRES-5 PowerMAX™ 5 Gallon Steel Hydraulic Reservoir Tank with Inlet 1-1/2" FNPT and Outlet 3/4" FNPT. Constructed of sturdy 14 gauge steel and black powder coated for protection and durability

Features:
• 14 Gauge steel construction with black powder coated finish
• Breather cap
• Inlet strainer

Specifications:
• Tank Capacity: 5 Gal
• Inlet Port Size: 1-1/2”
• Outlet Port Size: 3/4”
• Warranty: 3 Years from date of purchase
• Dimension 15” x 9-1/4” x 8”
• Weight: 13.6 lbs

Fairview 51-10D 5/8 Tube OD x 1/2 Male Pipe x 5/8 Tube OD Brass Male Run Tee. Fairview's Forged Brass Male Run Tee SAE 45° Flare Fittings are ideal for use with LP-Gas, Natural Gas, Refrigeration, Gasoline and more

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Used with Copper, aluminum, and Welded Steel Hydraulic Tube that can be flared
• Working Pressure: 650 PSI
• Material: Forged brass
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Weight: 0.27 lbs

• Delavan 5/8" QA X 1/2" FNPT Straight Fitting w/ O-Ring, Black Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps

• Delavan 5/8" QA X 1/2" HB Elbow Fitting w/ O-Ring, Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps