Delavan Fluid Power

Delavan FC-35-400-SAE8 Bidirectional Flow Control Valve SAE8 9.3 GPM 5,800 Max PSI. The bidirectional low control valves SBA regulate the speed of an actuator in both directions.

Product Specifications

Specifications:

• Mfg.: FLUID-APP
• Type: SBA2S
• Port Size: SAE 8 (3/4-16 UNF)
• Maximum Flow: 9.3 GPM
• Maximum Pressure : 5,800 PSI
• Oil temperature: -4°F + 176°F
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 0.66 lbs

• Delavan UHA-5800-B Upper Housing Assembly
• Works with Delavan 5850 series pumps with Bypass
• Upper housing with 1/2" FNPT Ports
• Includes bypass valve

Delavan Valve Housing Assembly, 7870/7871/7970/7971 FB2 / FB3 & 7972 FB6 Series Pumps

Delavan 90200 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 6900 series pumps
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 1.85

Delavan Replacement Handle Kit for KOV30-NPT Kick-Off Valve

Included In Kit:
• Grip, Black (1)
• Control Lever (1)
• Clevis Pin (1)
• Chain Link (1)
• Cotter Pin (1)
• Screw (2)
• Washer (2)
• Handle Bracket (1)
• Seal Retainer (1)
• Weight: 1.20 lbs

Delavan PM-XH7002 Rod Clevis 2" & 2.5" Bores, 1.125 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 2.0” & 2.5”
• Rod Diameter: 1.125”
• Pin Hole Diameter: 1”
• Weight: 1.95 lbs

Delavan PM-XH7003 Rod Clevis 3", 3.5", 4" & 5" Bores, 1.125 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 3.0”, 3.5", 4" & 5”
• Rod Diameter: 1.125”
• Pin Hole Diameter : 1”
• Weight: 3.35 lbs

Delavan PML40-200 Hydraulic Cylinder Repair Kit

Kit Includes:
• Wiper Seal: 1
• Rod Seal: 1
• Piston Seal: 1
• Grand O-Rings: 2
• Piston Rod O-Ring: 1

PML SERIES Tie-Rod Cylinders Seal Location and Descriptions

Specifications:
• Bore Size: 4”
• Rod Size: 2”
• Weight: 1.3 Oz

Note: Only works with cylinders having serial number starting with a XH (located near base of cylinder imprinted on the tube)

Delavan PowerFLO™ 2200 Series Diaphragm Pump. Demand Switch – Operates only when liquid flow is required

Motor:
• Type: 12 VDC, permanent magnet, thermally protected, splash proof
• Leads: 18 AWG, 4.5” long with 2-pin connector
• Amps: 3.5 Max.
• Duty Cycle: Intermittent

Materials of Construction:
• Motor Housing: Nylon 6/6
• Pump Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene

Pump:
• Demand Switch – Operates only when liquid flow is required
• Shut-Off: 40 ±5 PSI factory setting
• Turn-On: 25 ±5 PSI factory setting
• Type: 2-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 110°F Max.
• Priming Capabilities: 4 feet suction lift
• Max. Flow: 1.0 GPM
• Max Pressure: 40 PSI
• Inlet/Outlet Ports: 3/8” hose barb
• Packaging: Small box
• UPC: 830344009724 & 830344007591
• Weight: 1.25 lbs

• Delavan Lower Housing Assembly
• Works with Delavan 7822 & 7823 series pumps
• Note: Does not work with I-Series pumps
• Includes diaphragm, pistons, cam and bearing

• Delavan Lower Housing Assembly
• Works with Delavan 7802 & 7812 series pumps
• Includes diaphragm, pistons, cam and bearing
• Note: Does not work with I-Series pumps
• Replaces LHA7863-7F77

Delavan Closed Center Plug for MBV Valves

• Delavan Upper Housing Assembly w/ 3/4" QA Ports
• Works with Delavan 7822FS series pumps with pressure switch
• Note: Does not work with I-Series pumps
• Includes pumps head housing and pressure switch part

The Torque Bar and Chain is needed to anchor a PTO-mounted pump to keep it from turning with the PTO shaft. Fits all Roller pumps

• Delavan Upper Housing Assembly
• Works with Delavan 7801 & 7802 series pumps with pressure switch
• Inlet/Outlet Ports - 5/8 quick attach
• Includes pumps head housing and pressure switch part
• Note: Does not work with I-Series pumps

Delavan Aluminum Filter Holder for Spin on Hydraulic Filters. Uesd for hydraulic system return line filter for log splitters, small tractors and other power equipment

Specifications:
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 2.75” x 3.75”
• Weight: 0.75 lbs

• Delavan Upper Housing Assembly
• Works with Delavan 7811 & 7812 series pumps with pressure switch
• Inlet/Outlet Ports - 3/8” FNPT
• Includes pumps head housing and pressure switch part
• Note: Does not work with I-Series pumps
• Replaces UHA7863-7F77-T

Delavan PML40-125 Hydraulic Cylinder Repair Kit

Kit Includes:
• Wiper Seal: 1
• Rod Seal: 1
• Piston Seal: 1
• Grand O-Rings: 2
• Piston Rod O-Ring: 1

PML SERIES Tie-Rod Cylinders Seal Location and Descriptions

Specifications:
• Bore Size: 4”
• Rod Size: 1-1/4”
• Weight: 0.90 Oz

Note: Only works with cylinders having serial number starting with a XH (located near base of cylinder imprinted on the tube)

Delavan PM-XH7005 Rod Clevis 3", 3.5", 4" & 5" Bores, 1.25 -12 UNF x 1.25" Pin Hole

Specifications:
• Bore: 3.0”, 3.5", 4" & 5”
• Rod Diameter: 1.25”
• Pin Hole Diameter : 1.25”
• Weight: 2.90 lbs

Delavan PowerMAX™ Stroke Control Kit 1 Fits: 1-1/8", 1-1/4", 1-3/8", & 1-1/2" Cylinder Shafts

• Delavan valve housing assembly
• Works with Delavan 7801, 7802, 7811, 7812 & 7822FS series pumps
• Note: Does not work with I-Series pumps
• Includes valve and valve housing, Viton
• Replaces VHA7863-7F77

Delavan 50-126 Aluminum Heat Sink. Fits all 4" Diameter Delavan motors

Specifications:
• Snap-fit heat sinks will reduce motor heat up to 30%
• Works with Delavan 7870, 7970, 7871, 7971, FB2 & FB3 series pumps
• Help to extend the available run time of the pump as well as increase motor life
• Heat sinks are made of extruded aluminum with a clear finish
• Overall Dimensions: 3.75” L x 5.0” W x 3.44” H
• Replaces 50-125
• Net Weight: 0.50 Lbs.

• Delavan 60 - 100 PSI pressure switch assembly
• 7801, 7802, 7811, 7812 & 7822FS series pumps
• 7812 & 7822FS I-Series pumps
• 5800/5900 and 7870/7871//7970/7971 FB2 & FB3 Series Pumpss
• Replaces 7800-PSW

Delavan Pressure Adjustment Instructions

10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment

Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems

Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Dimension 3.75” x 5”
• Weight: 1.3 lbs

Delavan 50-076 Aluminum Heat Sink. Fits all 3" Diameter Delavan motors

Specifications:
• Snap-fit heat sinks will reduce motor heat up to 30%
• Works with Delavan 7801, 7802, 7811, 7812, 7822, 5800 & 5900 series 3-chamber/5-chamber pumps
• Help to extend the available run time of the pump as well as increase motor life
• Heat sinks are made of extruded aluminum with a clear finish
• Overall Dimensions:5.0” L x 3.75” W x 2.56” H
• Replaces 50-075
• Net Weight:0.55 Lbs.

• Delavan Relay (J58-070) with Heat Shrink Boot
• Works with Delavan PowerFLO , 7870/7970 FB-2 Series Pump

Delavan PM-XH8101C Cylinder Pin Kit - 1" Pin W/2 Cotter Pins

Specifications:
• 1" Diameter Clevis Pin: 1
• Cotter Pins: 2
• Weight: 0.75 lbs

Delavan FP-5CH34-RT 3 Piece 3/4" Hose Barb x 3/4" QA Fittings KIt

Specifications:
• (2) 3/4"Straight Hose Barb x 3/4" QA (5DFA34)
• (1) 3/4" Elbow Hose Barb x 3/4" QA (5DFE34)
• Works with 5900, 7822FS and FB2 & FB3 7900 Series Quick Attach Pumps
• Weight: 1.6 oz

Quick Connect Fittings Kit for Delavan 2.2 GPM Flex Pump:

• (2) 5/8” QA x 3/8" HB Elbow Fittings
• (1) 5/8” QA x 3/8" Straight HB Fitting
• (2) 3/4” to 5/8” Port Adapter
• (2) Slide Connectors for 5/8” Fittings

Delavan FP-5CH12-RT 3 Piece 1/2" Hose Barb x 3/4" QA Fittings KIt

Specifications:
• (2) 1/2" Straight Hose Barb x 3/4" QA (5DFA12)
• (1) 1/2" Elbow Hose Barb x 3/4" QA (5DFE12)
• Works with 5900, 7822FS and FB2 & FB3 7900 Series Quick Attach Pumps
• Weight: 1.1 oz

Delavan PM-XH8102C Cylinder Pin Kit - 1.25" Pin W/2 Cotter Pins

Specifications:
• 1.25" Diameter Clevis Pin: 1
• Cotter Pins: 2
• Weight: 1.25 lbs