Delavan Fluid Power

Delavan PM-XH7006 Rod Clevis 4" & 5" Bores, 1.5 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 4" & 5”
• Rod Diameter: 1.5”
• Pin Hole Diameter : 1”
• Weight: 4.8 lbs

10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter & Aluminum Holder 3/4” NPT. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment

Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems

Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 3.75” x 7”
• Weight: 2.1 lbs

• Delavan Upper Housing Assembly
• Works with Delavan 5900 series pumps with Bypass
• Upper housing with 3/4 quick attach ports
• Includes bypass valve

Delavan 25228 Repair Kit for 7 Roller Pump W/ 7-3/4" Rollers (Old Style)

Specifications:
• Old Style Delavan Roller Pump Repair Kits Kit contains rollers, shaft seals, O-rings and instructions
• Delavan pump 77-4111

Delavan 90300 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 2.15

Delavan FC-35-400-SAE8 Bidirectional Flow Control Valve SAE8 9.3 GPM 5,800 Max PSI. The bidirectional low control valves SBA regulate the speed of an actuator in both directions.

Product Specifications

Specifications:

• Mfg.: FLUID-APP
• Type: SBA2S
• Port Size: SAE 8 (3/4-16 UNF)
• Maximum Flow: 9.3 GPM
• Maximum Pressure : 5,800 PSI
• Oil temperature: -4°F + 176°F
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 0.66 lbs

• Delavan UHA-5800-B Upper Housing Assembly
• Works with Delavan 5850 series pumps with Bypass
• Upper housing with 1/2" FNPT Ports
• Includes bypass valve

Delavan Valve Housing Assembly, 7870/7871/7970/7971 FB2 / FB3 & 7972 FB6 Series Pumps

Delavan 90200 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 6900 series pumps
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 1.85

Delavan Replacement Handle Kit for KOV30-NPT Kick-Off Valve

Included In Kit:
• Grip, Black (1)
• Control Lever (1)
• Clevis Pin (1)
• Chain Link (1)
• Cotter Pin (1)
• Screw (2)
• Washer (2)
• Handle Bracket (1)
• Seal Retainer (1)
• Weight: 1.20 lbs

Delavan PM-XH7002 Rod Clevis 2" & 2.5" Bores, 1.125 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 2.0” & 2.5”
• Rod Diameter: 1.125”
• Pin Hole Diameter: 1”
• Weight: 1.95 lbs

Delavan PM-XH7003 Rod Clevis 3", 3.5", 4" & 5" Bores, 1.125 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 3.0”, 3.5", 4" & 5”
• Rod Diameter: 1.125”
• Pin Hole Diameter : 1”
• Weight: 3.35 lbs

Delavan PML40-200 Hydraulic Cylinder Repair Kit

Kit Includes:
• Wiper Seal: 1
• Rod Seal: 1
• Piston Seal: 1
• Grand O-Rings: 2
• Piston Rod O-Ring: 1

PML SERIES Tie-Rod Cylinders Seal Location and Descriptions

Specifications:
• Bore Size: 4”
• Rod Size: 2”
• Weight: 1.3 Oz

Note: Only works with cylinders having serial number starting with a XH (located near base of cylinder imprinted on the tube)

Delavan PowerFLO™ 2200 Series Diaphragm Pump. Demand Switch – Operates only when liquid flow is required

Motor:
• Type: 12 VDC, permanent magnet, thermally protected, splash proof
• Leads: 18 AWG, 4.5” long with 2-pin connector
• Amps: 3.5 Max.
• Duty Cycle: Intermittent

Materials of Construction:
• Motor Housing: Nylon 6/6
• Pump Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene

Pump:
• Demand Switch – Operates only when liquid flow is required
• Shut-Off: 40 ±5 PSI factory setting
• Turn-On: 25 ±5 PSI factory setting
• Type: 2-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 110°F Max.
• Priming Capabilities: 4 feet suction lift
• Max. Flow: 1.0 GPM
• Max Pressure: 40 PSI
• Inlet/Outlet Ports: 3/8” hose barb
• Packaging: Small box
• UPC: 830344009724 & 830344007591
• Weight: 1.25 lbs