10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment
Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems
Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Dimension 3.75” x 5”
• Weight: 1.3 lbs
10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter & Aluminum Holder 3/4” NPT. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment
Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems
Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 3.75” x 7”
• Weight: 2.1 lbs
Delavan 90700 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation
Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90
Delavan 90600 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation
Specifications
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90
Delavan 90300 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation
Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 2.15
Delavan 90200 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation
Specifications
• Use with Delavan 6900 series pumps
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 1.85
• Delavan Nylon 3/4" QA X 1/2" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
• Delavan Nylon 3/4" QA X 1/2" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
• Delavan Nylon 3/4" QA X 3/4" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
• Delavan Nylon 3/4" QA X 3/4" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
• Delavan Nylon 3/4" QA X 3/8" HB Elbow Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
• Delavan Nylon 3/4" QA X 3/8" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Cast Iron
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs
Delavan RollerPRO® 4901C Series 4-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5/8” hollow shaft
• Rotation: CW (standard)
• Housing: Cast Iron
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs
Delavan RollerPRO® 4901SS Stainless Steel Diamond Series™ 4-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 1⁄2” hollow shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs
Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs
Delavan HYDRES-5 PowerMAX™ 5 Gallon Steel Hydraulic Reservoir Tank with Inlet 1-1/2" FNPT and Outlet 3/4" FNPT. Constructed of sturdy 14 gauge steel and black powder coated for protection and durability
Features:
• 14 Gauge steel construction with black powder coated finish
• Breather cap
• Inlet strainer
Specifications:
• Tank Capacity: 5 Gal
• Inlet Port Size: 1-1/2”
• Outlet Port Size: 3/4”
• Warranty: 3 Years from date of purchase
• Dimension 15” x 9-1/4” x 8”
• Weight: 13.6 lbs
• Delavan 5/8" QA X 1/2" FNPT Straight Fitting w/ O-Ring, Black Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps
• Delavan 5/8" QA X 1/2" HB Elbow Fitting w/ O-Ring, Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps
• Delavan 5/8" QA X 3/8" FNPT Straight Fitting w/ O-Ring, Black Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps
• Delavan 5/8" QA X 3/8" HB Elbow Fitting w/ O-Ring, Nylon (7800 Series, QA Only)
• Works with 7800 Series Quick Attach Pumps
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CCW (standard)
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT female (rear ports)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CCW (standard)
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs
Delavan RollerPRO® 6900DSS Stainless Steel Diamond Series™ 6-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CCW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs
Kit includes:
• 1pc #6900DSS Delavan stainless steel 6-roller pump
• 1pc #90200 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Note: Pump kit shown in picture is DPK-6900C
• Weight: 13 lbs
Delavan RollerPRO® 7900C Series 7-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 7-Roller design
• Max. Flow: 22.5 GPM
• Max Operating Speed: 850 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 1” NPT (female)
• Base Mounted: 3⁄8 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 15⁄16” solid shaft
• Rotation: CCW (standard)
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 14 lbs
Delavan RollerPRO® 8900C Series 8-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 8-Roller design
• Max. Flow: 24.0 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 1” NPT (female)
• Base Mounted: 3⁄8 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 15⁄16” solid shaft
• Rotation: CCW (standard)
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 14 lbs
Kit includes:
• 1pc #8900C Delavan cast iron 8-roller pump
• 1pc #90300 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Note: Pump kit shown in picture is DPK-6900C
• Weight: 18 lbs
Delavan RollerPRO® 8900C-R Series 8-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers
Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 8-Roller design
• Max. Flow: 24.0 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 1” NPT (female)
• Base Mounted: 3⁄8 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 15⁄16” solid shaft
• Rotation: CW
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 14 lbs
Delavan RollerPRO® 8900DSS Stainless Steel Diamond Series™ 8-roller pump
Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 8-Roller design
• Max. Flow: 24.0 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 1” NPT (female)
• Base Mounted: 3⁄8 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 15⁄16” solid shaft
• Rotation: CCW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Warranty: 1 Year limited
• Weight: 14 lbs
Kit includes:
• 1pc #8900DSS Delavan stainless steel 8-roller pump
• 1pc #90300 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Note: Pump kit shown in picture is DPK-6900C
• Weight: 18 lbs
Delavan RollerPRO® 8900DSS-R Stainless Steel Diamond Series™ 8-roller pump
Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
Specifications
• Type: 8-Roller design
• Max. Flow: 24.0 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 1” NPT (female)
• Base Mounted: 3⁄8 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 15⁄16” solid shaft
• Rotation: CW
• Housing: Stainless Steel Diamond Series™
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Warranty: 1 Year limited
• Weight: 14 lbs
Delavan Aluminum Filter Holder for Spin on Hydraulic Filters. Uesd for hydraulic system return line filter for log splitters, small tractors and other power equipment
Specifications:
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 2.75” x 3.75”
• Weight: 0.75 lbs
Delavan FP-5CH12-RT 3 Piece 1/2" Hose Barb x 3/4" QA Fittings KIt
Specifications:
• (2) 1/2" Straight Hose Barb x 3/4" QA (5DFA12)
• (1) 1/2" Elbow Hose Barb x 3/4" QA (5DFE12)
• Works with 5900, 7822FS and FB2 & FB3 7900 Series Quick Attach Pumps
• Weight: 1.1 oz
Delavan FP-5CH34-RT 3 Piece 3/4" Hose Barb x 3/4" QA Fittings KIt
Specifications:
• (2) 3/4"Straight Hose Barb x 3/4" QA (5DFA34)
• (1) 3/4" Elbow Hose Barb x 3/4" QA (5DFE34)
• Works with 5900, 7822FS and FB2 & FB3 7900 Series Quick Attach Pumps
• Weight: 1.6 oz
Delavan FC-35-400-SAE8 Bidirectional Flow Control Valve SAE8 9.3 GPM 5,800 Max PSI. The bidirectional low control valves SBA regulate the speed of an actuator in both directions.
Specifications:
• Mfg.: FLUID-APP
• Type: SBA2S
• Port Size: SAE 8 (3/4-16 UNF)
• Maximum Flow: 9.3 GPM
• Maximum Pressure : 5,800 PSI
• Oil temperature: -4°F + 176°F
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 0.66 lbs
Delavan Closed Center Plug for MBV Valves
• Delavan Complete Pump Head Assembly
• Works with Delavan 5950 series pumps with bypass valve
• Head assembly with 3/4 quick attach ports
• Delavan PH-7802-PS Complete Pump Head Assembly w/ 5/8" QA Ports
• Works with Delavan 7802-201 and 7802-201-SB pumps with pressure switch
• Delavan Complete Pump Head Assembly w/ 3/8” FNPT Ports
• Works with Delavan 7812 series and 7812 I-Series pumps with pressure switch
• Replaces PH-7812-D
• Delavan Complete Pump Head Assembly w/ 3/4" QA Ports
• Works with Delavan 7822FS series and 7822FS I-Series pumps with pressure switch