General Pump

GP 42" Stainless Steel Vented Dual Lance 4,050 PSI 10.5 GPM 320º F

General YG4500STC / PA Linear Rear Entry Trigger Gun with Stainless inlet fitting & tube and ceramic ball.

Features:
• Shockproof plastic housing
• Ergonomic design, Minimizes fatigue for the operator
• Stainless Steel seat, inlet fitting & tube
• Ceramic bal
• Internal construction of brass and Stainless Steel

Specifications:
• Rated Pressure: 4,500 PSI
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8” NPT-F
• Outlet: 1/4” NPT-F
• Materials: Stainless Steel, Brass, Ceramic, Plastic, Buna-N, Teflon
• Dimensions: 8.4” x 5.4” x 1.2”
• Weight: 1.3 lbs

General Pump 2100437 Hose Reel Stacking Kit. Fits DHRA Hose Reels DHRA50150, DHRA50300 & DHRA50450

FEATURES
• Stacks up to 4 high
• All steel construction
• Powder coated
• Stainless steel hardware

SPECIFICATIONS
• Works with DHRA50150, DHRA50300 & DHRA50450 A Frame Hose Reel
• Carton Size: 26.5” x 17” x 4.5”
• Hose Reel Not Included
• Weight 20.3 lbs

PA FL7 / General Pump YFL7SWITCH 5,650 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

FL7 Data Sheet

Specifications
• Rated Pressure: 5,100 PSI
• Permissible Pressure: 5,650 PSI
• Max Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 1.6 GPM
• Activation Flow Rate: Vertical: 2.4 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 15.38 oz.

General Piston Guide

General Pump YDL41SSB / PA LD 9 41” Stainless Steel Molded Grip Dual Lance 4,050 PSI

Features:
• Double lance, with two tubes. First one for high pressure fluid and second one, deviced with handle, for low pressure detergent
• Provide a convenient method of operating a downstream chemical injection system by turning the insulated adjustment handle
• Designed for hot or cold water systems
• Made in Italy

Specifications:
• Length: 41"
• Inlet: 1/4" NPT-M
• Outlet Nozzle Fittings (2): 1/4" NPT-F
• Rated Pressure: 3,650 PSI
• Max. Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM
• Max. Temp.: 320° F
• Materials: Stainless Steel, Brass, Plastic, Buna-N
• Note: Nozzles not included
• Weight: 2.25 lbs

General Pump 2702000 Hose For Hammerhead Surface Cleaners DCFSCP20, DCFSCP20GZ, DCFSCS22Z & DCFSCP24GZ

General Kit 309 - Kit, Valve Inlet, Outlet

• Jetter Valve
• Turn a General Pump into a Sewer Jetting machine the inexpensive way!
• Use with General Pump TT series pumps
• Generates flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications
• Simple operation allows both full-flow and pulsation modes
• Large, easy to grasp handle
• Easy installation, replace middle inlet valve cap and valve
• Maximum Pressure: 5,000 PSI
• Weight: 0.5 lbs

• Jetter Valve
• Turn a General Pump into a Sewer Jetting machine the inexpensive way!
• Use with General Pump EZ series pumps
• Generates flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications
• Simple operation allows both full-flow and pulsation modes
• Large, easy to grasp handle
• Easy installation, replace middle inlet valve cap and valve
• Maximum Pressure: 5,000 PSI
• Weight: 0.5 lbs

• Jetter Valve
• Turn a General Pump into a Sewer Jetting machine the inexpensive way!
• Use with General Pump 47 series pumps
• Generates flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications
• Simple operation allows both full-flow and pulsation modes
• Large, easy to grasp handle
• Easy installation, replace middle inlet valve cap and valve
• Maximum Pressure: 5,000 PSI
• Weight: 0.5 lbs