General Pump

General Pump #2.3mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.3 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #1.8mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #1.8 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #2.1mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.1 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump D10067 High Pressure Stainless Steel Swivel 3/8" M x 3/8" F 5,000 PSI

Specifications:
• Body Material: Stainless steel
• Max GPM: 10
• Rated PSI: 5,000
• Max PSI: 5,000
• Max Temp: 200°
• Inlet: 3/8" NPT-M
• Outlet: 3/8" NPT-F
• Weight: 3.5 oz

General Pump 100723 6,000 PSI Safety Relief Valve 3/8” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 3/8" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100722 6,000 PSI Safety Relief Valve 1/2” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 1/2" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100724 6,000 PSI Safety Relief Valve 1/4” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 1/4" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100729 6,000 PSI Safety Relief Valve 1/2” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: End
• Max Temperature: 32 - 150° F
• Inlet: 1/2" NPT-M
• Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100728 6,000 PSI Safety Relief Valve 1/4” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: End
• Max Temperature: 32 - 150° F
• Inlet: 1/4" NPT-M
• Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump Pivot Coupler 1/4 QC 4,500 PSI 10.0 GPM. Locks In 3 Positions. This General Pump Pivot Coupler locks at 45° in either an up or down position for difficult cleaning angles

Features
• Locks at 45° in up or down position
• Mounts to any 1/4" QC lance
• Brass construction with chrome-plated steel plug

Specifications
• Inlet:1/4” QC plug
• Outlet:1/4” QC socket
• Max. Pressure: 4,500 PSI
• Max Flow: 10.0 GPM
• Number of positions: 3
• Weight: 0.30 lbs

General Pump 2100472GH Low Pressure In-line Water Filter 3/4 FGH x 1/2” NTP-M with 1/4" Bypass Ports

Features
• Low-pressure in-line filter
• Rigid construction
• Stainless Steel mesh filter
• Die cast aluminum (anodized) housing and plastic cap
• No tools required for cleaning
• Ports for bypass hose and gauge
• Brass garden hose fitting (2100472GH)

Specifications
• Max Volume: 8.0 GPM
• Maximum Pressure: 145 PSI
• Temperature: 176° F
• Filter: 50 Mesh
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” F
• Materials: Aluminum, Brass, Plastic, Buna-N
• Weight: 0.30 Lbs

General Pump #3.5 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 3.5
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart