General Pump

General Pump DHRA50450 3/8" x 450' or 1/2" x 375' or 5/8” x 300’ (garden hose). "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 26” x 20” x 18”
• Gross Weight 47.6 lbs

General Pump DHRA50150 3/8" x 150', 1/2" x 125' "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 150’
• Capacity 5/8" Garden Hose: 125’
• Capacity 3/4" Garden Hose: 100’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Gray
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 16” x 20” x 18”
• Note: Unit pictured is model DHRA50300
• Gross Weight 36.4 lbs

General Pump DHRA50300 3/8" x 300', 1/2" x 250' "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 21” x 20” x 18”
• Gross Weight 41.9 lbs

General Pump 2100379 Wall Mount Hose Reel Kit with Swivel Plate For D3000 & DHR Hose Reels

FEATURES
• Easily and safely mount your hose reel to the wall
• Built in plate swivel with ball bearing allows smooth complete rotation
• Lock on plate keeps your hose reel from rotating when you don’t want it to
• Powder coated all steel construction for durability, strength and lasting protection

SPECIFICATIONS
• Works with Hose Reel Models: D3000 and DHR
• Color: Black
• Carton Size: 18”x 14”x 9”
• Weight 9.35 lbs

General Pump 2100375 Cart Kit for D3000 & DHR Hose Reels. Cart has pre-drilled mounting base platform

FEATURES
• Convert your General Pump hose reel into a hose reel cart
• Makes storage and moving of your fully loaded hose reel easy
• Stainless steel hardware
• Powder coated steel frame
• Unique design
• Solid 10” Polyurethane wheels will never go flat
• Removable handle for compact storage

SPECIFICATIONS
• Works with Hose Reel Models: D3000 and DHR
• Color: Black
• Carton Size: 33” x 21” x 9”
• Hose Reel Not Included
• Weight 27.5 lbs

General Pump lnline Adjustable Needle Valve with Bottom Adjustable Metering Screw. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow

Features
• Adjustable from full flow to full close
• Full flow can be controlled with metering screw
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA

Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.40 lbs

General Pump lnline Adjustable Needle Valve. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow

Features
• Adjustable from full flow to full close
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA

Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.43 lbs

General Pump lnline Adjustable Needle Valve with Side Adjustable Metering Screw. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow

Features
• Adjustable from full flow to full close
• Full flow can be controlled with metering screw
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA

Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.40 lbs

General Pump #2.1mm Adjustable Chemical Injector 304 Stainless Steel, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• 304 Stainless Steel
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 5,500 PSI
• Max Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.50 lbs

General Pump #2.3mm Adjustable Chemical Injector 304 Stainless Steel, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• 304 Stainless Steel
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 5,500 PSI
• Max Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.50 lbs

General Pump #1.8mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.3mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #1.8mm Adjustable Chemical Injector 304 Stainless Steel, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• 304 Stainless Steel
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 5,500 PSI
• Max Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.50 lbs

General Pump #1.8mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump D10091 Quick Disconnect Coupler Socket Stainless Steel 1/2” x 1/2" NPT-M 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/2"
• Thread: 1/2” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS3MSS
• Weight: 0.30 lb

General Pump D10093 Quick Disconnect Coupler Plug Stainless Steel 1/2” x 1/2" NPT-M 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: 304 Stainless steel
• Plug Size: 1/2"
• Thread: 1/2” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Replaces QCP3MSS
• Weight: 0.15 lb

General Pump D10061 Quick Disconnect Coupler Easy-Grip Socket Nickel Plated Brass 1/4” x 1/4" NPT-F 5,000 PSI

Features:
• Offers protection when the coupler is hot and a steady grip that won't slip easily
• Quick disconnect design
• Nickel plated brass for durability
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 0.15 lb