General Pump

General Pump DF05080 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF07550 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DF10050 Clear Bowl Inlet Filter / Strainer 1" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF10080 Clear Bowl Inlet Filter / Strainer 1" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF12550 Clear Bowl Inlet Filter / Strainer 1-1/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/4” NPT-F
• Outlet: 1-1/4” NPT-F
• Weight: 0.75 Lbs

General Pump DF15050 Clear Bowl Inlet Filter / Strainer 1-1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/2” NPT-F
• Outlet: 1-1/2” NPT-F
• Weight: 1.0 Lbs

General Pump DF05050 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF07580 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General EZ2555S 2500 PSI, 5.5 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

General Pump 100687 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 12V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100688 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 12V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100719 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 12V, Single Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100720 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 12V, Single Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100719 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 24V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 24V 45.6 Watts
• Weight: 8.0 lbs

General Pump 100720 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 24V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 24V 45.6 Watts
• Weight: 8.0 lbs

General Pump Full Slide Hammer

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• Use with 520297m clutch centering tool
• Weight: 11.0 lbs

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

General Pump Clutch Centering Tool

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• 1/2"-13 Threaded Hole
• Use with 100163 Slide-hammer or bolt.
• Weight: lbs

General Pump Hose For Hammerhead DCFS 18 Surface Cleaners DCFSCP18 & DCFSCP18GZ