General Pump

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 3/8" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 3/8" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 1/4" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 1/4" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 1/2" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 1/2" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

• Direct Mount Unloader Fits General Series Pumps: 44 (EZ Pumps), 47 and 63 (TX Pumps)
• Maximum Pressure: 3,650 PSI
• Max. Volume: 7.8 GPM
• Adjustable pressure
• No Chemical Injector
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Weight: 1.8 lbs

General Pump D10035 Quick Disconnect Coupler Socket Brass 3/8” x M22-14MM M Plug 4,000 PSI

Features:
• Adapts from quick disconnect coupler to M22 twist connect
• Brass
• EPDM O-Ring

Specifications:
• Body Material: Brass
• Socket Size: 3/8"
• Thread: M22-14MM M Plug
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces QCS2M22B
• Weight: 0.23 lb

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual I.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

• Flow Actuated Unloader
• Pressure Range : 0 - 3,000 PSI
• Max. Volume: 4.2 - 6.6 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/8” FPT
• Gauge Ports (2): 1/4” FPT
• 4.5 lbs. weight

• Flow Actuated Unloader
• Pressure Range : 0 - 3,000 PSI
• Max. Volume: 3.0 - 4.2 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/8” FPT
• Gauge Ports (2): 1/4” FPT
• 4.5 lbs. weight

• Trapped Pressure Unloader
• Maximum Pressure: 3,000 PSI
• Max. Volume: 10.8 GPM
• Adjustable pressure
• Brass body
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (2): 3/8” FPT
• Auxiliary Ports (1): 1/4” FPT
• 2.3 lb. weight

• Flow Actuated Unloader
• Pressure Range : 0 - 3,000 PSI
• Max. Volume: 6.6 - 10.8 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/8” FPT
• Gauge Ports (2): 1/4” FPT
• 4.5 lbs. weight

• Flow Actuated Unloader
• Pressure Range : 0 - 3,000 PSI
• Max. Volume: 2.1 - 3.0 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/8” FPT
• Gauge Ports (2): 1/4” FPT
• 4.5 lbs. weight

• Flow Actuated Unloader
• Pressure Range : 1,450 - 3,000 PSI
• Max. Volume: 4.2 - 6.6 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/4” MPT
• Gauge Ports (2): 1/4” FPT
• 2.3 lbs. weight

• Flow Actuated Unloader
• Pressure Range : 1,450 - 3,000 PSI
• Max. Volume: 3.0 - 4.2 GPM
• Adjustable pressure
• Brass body
• All Stainless steel & brass internal parts
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 3/8" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports (1): 3/4” MPT
• Gauge Ports (2): 1/4” FPT
• 2.3 lbs. weight

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 3.6 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

1,500 PSI 2.11 GPM General TT9051EBF Direct Couple to Electric Motors (NEMA 56C)

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

• General 66 Series Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.8 EHP
• Max. Fluid Temp.: 165° F
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head has an exclusive lifetime warranty
• Plunger design improves thermal shock resistance
• Drive Side: Standard right
• Weight: 52.0 lb.