General Pump

General Pump DCG5010SO Compensating Low Fatigue Rear Inlet Trigger Gun (Safety Orange) 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and ABS trigger
• High visibility safety orange

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

General Pump DCG5010 Compensating Low Fatigue Rear Inlet Trigger Gun 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and trigger in Zytel (high tech nylon)

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

GP YVB75KDMN21 Direct Mount Unloader with 2.1 MM Injector Fits General Series Pumps: 44 (EZ Pumps), 47, 60 and 63 (TX Pumps)

• Maximum Pressure: 3,650 PSI
• Max. Volume: 7.8 GPM
• Adjustable pressure
• Chemical Injector: 2.1mm
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Weight: 2.1 lbs

General Pump YVB35KDME Direct-Mount, Control Set Unloader Used with ET, EP & ES Series Pumps

Featuring:
• Direct-mount, control set unloader
• Used with ET, EP and ES Series pumps
• Built-in bypass
• Sturdy steel and brass construction
• Adjustable locknut to control the maximum pressure
• Plastic adjustment knob (not pictured)

Specifications:
• Rated Pressure: 3,200 PSI
• Minimum Adjustable Pressure: 319 PSI
• Maximum Discharge Pressure: 3.650 PSI
• Rated Volume: 6.5 GPM
• Pressure Drop to Reset Bypass: 19%
• Max. Fluid Temp.: 195° F.
• Inlet Port: 1/2” BSP-F
• Outlet Port: 3/8” BSP-M
• Materials: Brass, Stainless Steel, Buna-N
• Overall Dimensions: 5.9” x 3.0” x 1.75”
• Weight: 1.8 lbs

4,000 PSI 4.0 GPM General EP1313G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1313G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1313G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

3,045 PSI 3.4 GPM General EP1508G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1508G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,045 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.6 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1508G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

2,610 PSI 2.9 GPM General PMRET1506G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General ET1506G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.9 GHP
• Max. Fluid Temp.: 165º F
• New “HR” anti-corrosion surface treatment on manifold
• Solid ceramic plungers

COMPONENTS:
• General ET1506G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 14.90 lb

2,610 PSI 3.2 GPM General PMRET1507G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General ET1507G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.6 GHP
• Max. Fluid Temp.: 165º F
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• Solid ceramic plungers

COMPONENTS:
• General ET1507G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 14.90 lb

4,000 PSI 4.0 GPM General EZ4040G Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EZ4040G Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• Forged brass head & valve covers
• Solid ceramic plungers

COMPONENTS:
• General EZ4040G Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 23.50 lb

General Flow Switch Up To 25.0 GPM

Features
• Micro-switch technology eliminates reed switch
• Activation below 4.0 GPM
• Minimal pressure drop up to 25 gpm flow
• Mount in vertical position

Specifications
• Maximum Operating Pressure: 3,000 PSI@25 GPM, 4,000 PSI@10 GPM
• Minimum Flow Required for Activation: 4.0 GPM @ 50 PSI
• Maximum Operating Flow: 25.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Dimensions: 6.3” x 2.0” x 1.3
• Materials: Buna-N, Brass, Plastic, Nickel-plated Neodymium
• Weight: 1.85 Lb

General Flow Switch With Pilot Feature. The General Pump flow switch is designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow.

Features
• The system will provide reliable switching with as little as .75 GPM flow and 18 PSI from the city water supply
• will also allow pump output flow up to 18.7 GPM @ 4,000 PSI with negligible pressure drop through the valve
• General Pump flow switches provide durable, reliable on/off switching for systems that require start/stop capability
• Mount in vertical position

Specifications
• Maximum Pressure: 4,000 PSI
• Maximum Flow: 18.7 GPM
• Minimum Volume: 0.75 GPM
• Minimum Pressure: 18 PSI
• Switch Contact Ratings @ 24 Volts DC: 75 Watts, 3A
• Switch Contact Ratings @ 120 Volts AC: 100 Watts, 8A
• Maximum Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-F
• Material: Brass, Stainless Steel, Buna-N
• Dimensions: 4.25” x 4.5” x 1.25” with 8 foot lead wire
• Weight: 2.5 Lb