J.E. Adams

1/4” Stainless Steel Cornering Sewer Jetter Nozzle, # 4.5. A single jet at 90 degrees to the two rear facing jets allows the hose to negotiate tight 90 degree bends or tees. This nozzle will get through bends that the other nozzles won't make.

Features
• Side jet pushes hose thru bends and corners
• 2 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,000 PSI
• Weight: 0.5 oz.

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual I.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/8” Stainless Steel Cornering Sewer Jetter Nozzle, # 4.5. A single jet at 90 degrees to the two rear facing jets allows the hose to negotiate tight 90 degree bends or tees. This nozzle will get through bends that the other nozzles won't make.

Features
• Side jet pushes hose thru bends and corners
• 2 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,000 PSI
• Weight: 0.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

JE Adams 7475 High Pressure 90° Brass Hose Reel Swivel. Universal hose reel swivel replacement

Features
• Made in USA with high quality components
• 90 Degree swivel action with Viton O-rings
• Teflon washer
• Repairable

Specifications
• Maximum Pressure: 3,000 PSI
• Maximum Flow Rate: 10.0 GPM
• Maximum Temperature: 300° F
• Material: Brass
• Inlet: 1/2" FPT
• Outlet: 1/2" FPT
• Weight: 14.0 oz

JE Adams 7035 High Pressure 90° Stainless Steel Swivel. Swivels under pressure

Features
• Made in USA with high quality components
• Low-torque application
• Long-lasting dust seal
• 360 Degree swivel action with Viton O-rings
• Repairable

Specifications
• Maximum Pressure: 5,000 PSI
• Maximum Flow Rate: 7.0 GPM
• Maximum Temperature: 300° F
• Material: Stainless steel
• Inlet: 3/8" MPT
• Outlet: 3/8" FPT
• Weight: 9.0 oz

JE Adams 7470 High Pressure Stainless Steel Swivel. Swivels under pressure

Features
• Made in USA with high quality components
• Stainless steel body and insert
• Repairable

Specifications
• Maximum Pressure: 5,000 PSI
• Maximum Temperature: 200° F
• Material: Stainless steel
• Inlet: 1/4" FPT
• Outlet: 1/4" MPT
• Weight: 3.0 oz

JE Adams 7044 High Pressure Stainless Steel Swivel. Swivels under pressure

Features
• Made in USA with high quality components
• Stainless steel body and insert
• Repairable

Specifications
• Maximum Pressure: 5,000 PSI
• Maximum Temperature: 200° F
• Material: Stainless steel
• Inlet: 3/8" FPT
• Outlet: 3/8" MPT
• Weight: 4.0 oz

JE Adams 7375 Maxi-Flow Stainless Steel Check Valve - 1/4 FPT x 1/4 FPT – 5,000 PSI

Features
• Maxi-Flow Check Valves used in applications where back flow is not permitted
• Can be used in air or fluid applications
• Install valve so that flow is in the direction of the arrow on the part

Specifications
• Maximum Pressure: 5,000 PSI
• Maximum Flow Rate: 4.0 GPM
• Maximum Temperature: 200° F
• Material: Stainless steel
• Inlet: 1/4" FPT
• Outlet: 1/4" FPT
• Size: 2.3”
• Weight: 4.0 oz

Poppet, Check Valve

Repair Kit for 1/4" & 3/8" Maxi-Flow Check Valves