Kuriyama of America, Inc.

Kuriyama PPBV075 3/4” Polypropylene Ball Valve 4-Bolt Design

Features:
• Full port
• Stainless steel bolts and nuts
• Teflon™ seats
• Viton® O-Ring stems and seals
• Polypropylene material is glass filled for extra strength
• Female NPT threads

Specifications:
• Size: 3/4”
• Type: Bolt valve
• Style: 4-Bolt Valve Design
• Connection Type: Female NPT
• Ball Material: Polypropylene
• Seal Material: Teflon™, Viton®
• Stem Material: Viton®
• PSI Rating at 70°F (+21°C): 150 PSI
• Weight: 0.85 lb

Kuri Tec® CLEARBRAID® K2140 Series BF Heavy Wall PVC Hose. A heavier walled crystal clear Phthalate Free yarn reinforced hose suitable for a wide variety of food and beverage applications

Features:
• Constructed with Phthalate Free compounds
• Crystal clear - allows visual confirmation of product flow
• Longitudinally-reinforced to reduce elongation under pressure
• Light weight
• Self-extinguishing
• Non-marking
• Silicone-free
• Non-conductive
• One-piece lengths
• Resistant to chemicals
• Compound hardness 73 ±3 Shore "A"
• Phthalate Free!

Specifications:
• Series: K2140
• Size Code: 04
• Service Temp. Range: 25º F to 150º F
• Nominal ID: 1/4”
• Nominal OD: 0.500”
• Length: 100’
• Working Pressure @ 70º F: 350 PSI
• Working Pressure @ 122º F: 200 PSI
• Weight: 8.0 lbs.

Piranha® LLRD Series 1/2” x 100’ sewer jetter hose assembly with MxM fittings. Piranha® LLRD series hose is used in applications for commercial, industrial and residential sewer cleaning

Construction:
• Inner Tube: Yellow seamless thermoplastic
• Reinforcement: High tensile Aramid braid
• Cover: Abrasion resistant polyether-urethane

Features:
• Materials: Constructed to provide rugged and reliable service under the most severe and demanding conditions
• Yellow Color Tube: Assures the user that they are using a WASTEC designated Piranha® Hose Product
• Seamless Thermoplastic Tube: Provides maximum resistance to hydrolysis
• High Tensile Single Aramid Braid
• Abrasion Resistant Polyether-Urethane: Polyurethane cover provides exceptional cut, abrasion and fungus resistance
• Pressure Testing: All Piranha® factory-assembled hoses are 100% pressure tested

Specifications:
• Service Temp. Range: -40º F to +150º F
• Hose ID: 1/2”
• Assembled Length: 100’
• Male NPT Fittings: 1/2 - 14
• Color: Red
• Max. Working Pressure: 5,000 PSI
• Weight: 14.0 lbs.

Kuriyama BEGP-038X700 3/8” x 100’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 11/16”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 100’
• Weight: 16 lbs

Kuriyama BEGP-038X700 3/8” x 700’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 11/16”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 700’ (Maximum 2 pcs. on reel)
• Weight: 112 lbs

Kuriyama BEGP-038X700 3/8” x 200’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 11/16”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 200’
• Weight: 32 lbs

Kuriyama BEGP-038X700 3/8” Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 11/16”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 1’
• Weight: 0.16 lbs/ft

Kuriyama BEGP-050X700 1/2” x 100’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 1/2”
• Nominal OD: 27/32”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 100’
• Weight: 24 lbs

Kuriyama BEGP-050X700 1/2” x 200’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 1/2”
• Nominal OD: 27/32”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 200’
• Weight: 48 lbs

Kuriyama BEGP-050X700 1/2” Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 1/2”
• Nominal OD: 27/32”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 1’
• Weight: 0.24 lbs/ft

Kuriyama BEGP-050X700 1/2” x 700’ Black EPDM Rubber Hose 250 PSI

Applications:
• Agricultural
• Construction
• Industrial
• Water service lines

Construction::
• Cover – Black abrasion and ozone resistant EPDM, limited oil resistance
• Reinforcement – Spiral polyester yarn
• Tube – Black EPDM, limited oil resistance
• Made In USA

Specifications:
• Color: Black
• Nominal ID: 1/2”
• Nominal OD: 27/32”
• Working Pressure: 250 PSI
• Service Temperature [Min]: -40º F
• Service Temperature [Max]: 200º F
• Brand: Redi-GP™
• Type: Air and Water Hose
• Material: EPDM Rubber
• Length: 700’ (Maximum 2 pcs. on reel)
• Weight: 168 lbs

Kuriyama BL-06BK 3/8” x 100' Black BRAID-Lock™ Non-Conductive Braided Construction 300 PSI Push-On Hose

Features::
• Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC
• MSHA Approved Flame Resistant Cover
• Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure
• Easy to couple - no tools required
• RMA Class "A" tube and cover oil resistance
• Wide range of applications where performance and ease of assembly are demanded

Construction::
• PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved
• Braided Textile - Optimum Angle for Push-On Fitting Retention
• Black Nitrile - RMA Class A oil resistance

Applications::
• Air Tools
• Low Pressure Pneumatic and Hydraulic Systems
• Lubricating oils/diesel fuel
• Robotic Welders in assembly where weld spatter is present
• Water lines in plastic molding industry

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 0.61”
• Working Pressure: 300 PSI
• Service Temperature [Min]: -30º F
• Service Temperature [Max]: 180º F
• Length: 100’
• Weight: 12 lbs

Kuriyama BL-06BK 3/8” x 200' Black BRAID-Lock™ Non-Conductive Braided Construction 300 PSI Push-On Hose

Features::
• Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC
• MSHA Approved Flame Resistant Cover
• Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure
• Easy to couple - no tools required
• RMA Class "A" tube and cover oil resistance
• Wide range of applications where performance and ease of assembly are demanded

Construction::
• PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved
• Braided Textile - Optimum Angle for Push-On Fitting Retention
• Black Nitrile - RMA Class A oil resistance

Applications::
• Air Tools
• Low Pressure Pneumatic and Hydraulic Systems
• Lubricating oils/diesel fuel
• Robotic Welders in assembly where weld spatter is present
• Water lines in plastic molding industry

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 0.61”
• Working Pressure: 300 PSI
• Service Temperature [Min]: -30º F
• Service Temperature [Max]: 180º F
• Length: 200’
• Weight: 24 lbs

Kuriyama BL-06BK 3/8” x 500' Black BRAID-Lock™ Non-Conductive Braided Construction 300 PSI Push-On Hose

Features::
• Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC
• MSHA Approved Flame Resistant Cover
• Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure
• Easy to couple - no tools required
• RMA Class "A" tube and cover oil resistance
• Wide range of applications where performance and ease of assembly are demanded

Construction::
• PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved
• Braided Textile - Optimum Angle for Push-On Fitting Retention
• Black Nitrile - RMA Class A oil resistance

Applications::
• Air Tools
• Low Pressure Pneumatic and Hydraulic Systems
• Lubricating oils/diesel fuel
• Robotic Welders in assembly where weld spatter is present
• Water lines in plastic molding industry

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 0.61”
• Working Pressure: 300 PSI
• Service Temperature [Min]: -30º F
• Service Temperature [Max]: 180º F
• Length: 500’
• Weight: 60 lbs

Kuriyama BL-06BK 3/8” Black BRAID-Lock™ Non-Conductive Braided Construction 300 PSI Push-On Hose

Features::
• Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC
• MSHA Approved Flame Resistant Cover
• Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure
• Easy to couple - no tools required
• RMA Class "A" tube and cover oil resistance
• Wide range of applications where performance and ease of assembly are demanded

Construction::
• PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved
• Braided Textile - Optimum Angle for Push-On Fitting Retention
• Black Nitrile - RMA Class A oil resistance

Applications::
• Air Tools
• Low Pressure Pneumatic and Hydraulic Systems
• Lubricating oils/diesel fuel
• Robotic Welders in assembly where weld spatter is present
• Water lines in plastic molding industry

Specifications:
• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 0.61”
• Working Pressure: 300 PSI
• Service Temperature [Min]: -30º F
• Service Temperature [Max]: 180º F
• Length: 1’
• Weight: 0.12 lbs/ft

Piranha® LLGR Series 1/4” x 200’ sewer jetter hose assembly with MxMS fittings. Piranha® LLGR series hose is used in applications for commercial, industrial and residential sewer cleaning

Construction:
• Inner Tube: Yellow seamless thermoplastic
• Reinforcement: High tensile double synthetic fiber braids
• Cover: Abrasion resistant polyether-urethane

Features:
• Materials: Constructed to provide rugged and reliable service under the most severe and demanding conditions
• Yellow Color Tube: Assures the user that they are using a WASTEC designated Piranha® Hose Product
• Seamless Thermoplastic Tube: Provides maximum resistance to hydrolysis
• High Tensile Double Synthetic Fiber Braids: Contributes to low volumetric expansion and eliminates loss of strength from moisture absorption
• Abrasion Resistant Polyether-Urethane: Polyurethane cover provides exceptional cut, abrasion and fungus resistance
• Pressure Testing: All Piranha® factory-assembled hoses are 100% pressure tested

Specifications:
• Service Temp. Range: -40º F to +160º F
• Hose ID: 1/4”
• Assembled Length: 200’
• Male NPT Fitting: 1/4 - 18
• Male Swivel NPT Fitting: 1/4 - 18
• Color: Green
• Max. Working Pressure: 4,000 PSI
• Weight: 13.7 lbs.

Kuriyama King Bee™ KBC300 Collar Clamp with 20' Rope

Features:
• Corrosion resistant stainless steel
• Adjustable sizing

Specifications:
• Inside Diameter ID: 3”
• Type: Collar clamp
• Clamp Material: Stainless steel
• Weight: 0.67 lbs.

Kuriyama PPBV050 1/2” Polypropylene Ball Valve 4-Bolt Design

Features:
• Full port
• Stainless steel bolts and nuts
• Teflon™ seats
• Viton® O-Ring stems and seals
• Polypropylene material is glass filled for extra strength
• Female NPT threads

Specifications:
• Size: 1/2”
• Type: Bolt valve
• Style: 4-Bolt Valve Design
• Connection Type: Female NPT
• Ball Material: Polypropylene
• Seal Material: Teflon™, Viton®
• Stem Material: Viton®
• PSI Rating at 70°F (+21°C): 150 PSI
• Weight: 0.88 lb

Kuriyama PPBV125 1-1/4” Polypropylene Ball Valve 4-Bolt Design

Features:
• Full port
• Stainless steel bolts and nuts
• Teflon™ seats
• Viton® O-Ring stems and seals
• Polypropylene material is glass filled for extra strength
• Female NPT threads

Specifications:
• Size: 1-1/4”
• Type: Bolt valve
• Style: 4-Bolt Valve Design
• Connection Type: Female NPT
• Ball Material: Polypropylene
• Seal Material: Teflon™, Viton®
• Stem Material: Viton®
• PSI Rating at 70°F (+21°C): 150 PSI
• Weight: 1.65 lb

Kuriyama PPBV125 1-1/4” Polypropylene Ball Valve 4-Bolt Design

Features:
• Full port
• Stainless steel bolts and nuts
• Teflon™ seats
• Viton® O-Ring stems and seals
• Polypropylene material is glass filled for extra strength
• Female NPT threads

Specifications:
• Size: 1-1/4”
• Type: Bolt valve
• Style: 4-Bolt Valve Design
• Connection Type: Female NPT
• Ball Material: Polypropylene
• Seal Material: Teflon™, Viton®
• Stem Material: Viton®
• PSI Rating at 70°F (+21°C): 150 PSI
• Weight: 1.65 lb