Low Prices
Fast Shipping!
SINCE 1991
Ag Spraying Equipment, Hoses,Pressure Washers, Sewer Jetters,
Water Pumps & More
- CATEGORIES
Shop By Category
- BRANDS
- SHIPPING QUOTE
- ABOUT
- GENERAL INFORMATION
- CONTACT US
MTM Hydro
High Pressure Inline Filter, 6000 PSI, 1/4" FPT x 1/4" MPT
MTM Hydro 6,000 PSI High Pressure Inline Filter, 1/4” FPT x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter
Specifications:
• Max. Pressure: 6,000 PSI
• Inlet: 1/4 FPT
• Outlet: 1/4 MPT
• Max Temp: 300°
• Weight: 0.25 lbs.
High Pressure Inline Filter, 6000 PSI, 1/4" QC Plug x 1/4" MPT
MTM Hydro 6,000 PSI High Pressure Inline Filter, 1/4” QC Plug x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter
Specifications:
• Max. Pressure: 6,000 PSI
• Inlet: 1/4” QC Plug
• Outlet: 1/4” MPT
• Max Temp: 300°
• Weight: 0.25 lbs.
Karcher K Series Bayonet Style Pressure Washer Fitting, Plastic
Karcher K Series Bayonet Style Pressure Washer Fitting
• Material: Plastic
• Inlet: 1/4” Female NPT
• Max Pressure: 2,200 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• May need optional ¼” x ¼” male fitting # 140754 shown below
• Weight: 0.15 lb
Karcher Professional Foam Lance with #1.10mm Nozzle and Bayonet Fitting (Free Shipping)
MTM Hydro 14.0349 Professional High Pressure Foam Lance with # 1.10mm Nozzle, Karcher K Series Bayonet Style Fitting and 32oz Bottle. The Professional Foam Lance combines a high pressure water flow mixed with detergent and air to produce thick clinging foam
Features:
• Shoots over 20 feet of dense foam
• Adjustment knob, increase or decrease the amount of detergent drawn into the water flow adjusting the amount of foam created
• Variable spray pattern, simple twist goes from a 0° focused jet to 50° fan pattern
• Allows cleaning agents or disinfectants to be applied evenly over a large surface
• Chemicals do not go thru the pump
• Wet foam allows more efficient use of chemical
Product’s Use:
• A pressure washer with a minimum of 1.4 GPM flow and 1,100 PSI is required for the product to operate properly
• Pressure washers with a flow unloader may require a different nozzle size to function properly
Specifications:
• Max. Flow Rate: 2.4 GPM
• Max. Pressure: 2,600 PSI
• Max. Temp.: 140°
• Nozzle Size: #1.10mm/
• 32oz Bottle
• Inlet: Karcher K series bayonet style fitting installed
• Comes with 1/4” QC Plug & 22mm-14 Male twist connect
• Weight: 1.20 lbs.
Laser Sewer Nozzle 1/4", # 12.0
1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 12.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/4", # 4.5
1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 4.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/4", # 5.5
1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 5.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/4", # 6.5
1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 6.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 6.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/4", # 8.0
1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 8.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/8", # 4.0
1/8” Stainless Steel Laser Sewer Jetter Nozzle, # 4.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/8", # 5.0
1/8” Stainless Steel Laser Sewer Jetter Nozzle, # 5.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 1/8", # 5.5
1/8” Stainless Steel Laser Sewer Jetter Nozzle, # 5.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 3/8", # 4.5
3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 4.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 3/8", # 6.5
3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 6.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 6.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 3/8", # 8.0
3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 8.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 3/8", # 12.0
3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 12.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.
Please use Nozzle Chart to determine proper nozzle size
Laser Sewer Nozzle 3/8", #5.5
3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 5.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.
Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction
Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.
Please use Nozzle Chart to determine proper nozzle size
MTM Astra 320 Trigger Gun 5000 PSI, 11.5 GPM
MTM Astra 320 Trigger Gun 5,000 PSI
Features:
• Combines Power and Performance with Comfort and Durability
• Unitized Valve
• Forged bronze body
• Glass-Filled nylon handle
Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 11.5 GPM
• Maximum Temperature: 300° F.
• Color: Black
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight 23 oz lbs
MTM Easy Start Valve 4,100 PSI
• Makes Starting Easier
• Requires less battery power, arm strength and less AMP draw on electric motors
• Max. pressure: 4,100 PSI
• Inlet thread size: 3/8" MPT
• Machined brass body
• Max. Temperature: 190º F.
• Max. water flow: 8.0 GPM
• Hose barb outlet
• Installs in outlet of pump head
MTM Foamer Repair Kit - O-Ring 2062-2087-2050-2031 & Stainless Steel Filter
• MTM Foamer Repair Kit - O-Ring 2062-2087-2050-2031 & Stainless Steel Filter
• Works with MTM # 14.0263 and 14.0349
• Includes part(s) 39.0014 39.0144 39.0321 39.0016 36.0226
power equipment and supply
Copyright © 2018 PWMall.com. All Rights Reserved.