PROPULSE, A Schieffer Co.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 1/2" ID
• Length: 50’
• Working (Maximum): Up to 3,987 PSI
• Burst (Minimum): 11,961 PSI
• Color: Black
• Maximum Temperature: 212° F.
• Ends: 1/2" MPT (1 solid & 1 swivel)
• Black bend restrictors on both ends
• Weight 22.30 lbs

Propulse 3/4” x 20’ black rubber wrapped 2-wire braid sewer jetter / cleaner leader hose

Features:
• Assembled leader hose has a male and female swivel fitting
• Leader hoses are more flexible than sewer jetter hose
• Will help the operator start the jetter hose down the sewer pipe

Specifications:
• SAE 100 R2 rated rubber hose
• Color: black
• Size: 3/4” ID x 20' L
• Maximum Pressure: 3,117 PSI
• Inlet: 3/4" Female NPSM (Swivel)
• Outlet: 3/4" Male NPT (Solid)
• Weight: 12.75 lbs

Propulse 4,000 PSI Grey “mark-less” 1' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 1’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 0.55 lbs

Propulse 6,000 PSI Grey “mark-less” 1' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 1’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 0.60 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 10’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 2.65 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 10’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 3.30 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 100’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 11.9 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 150’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 17.9 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 2’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 0.85 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 2’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.00 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 200’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Packaging: Wound on plastic reel
• Weight 27.8 lbs

Propulse Jetter Clean 3/8” X 300’ Lateral Line and Drain Cleaner Sewer Hose. Ideal for consumer and commercial sewer jetters with operating pressures of 4,000 PSI or less. Jetter Clean hoses offer optimum flexibility and lightweight construction.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 300’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Packaging: Wound on plastic reel
• Weight 35.7 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 4’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.25 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 4’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.45 lbs

Propulse Jetter Clean 3/8” X 50’ Lateral Line and Drain Cleaner Sewer Hose. Ideal for consumer and commercial sewer jetters with operating pressures of 4,000 PSI or less. Jetter Clean hoses offer optimum flexibility and lightweight construction.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 50’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 6.2 lbs

Propulse Hot Clean 6,000 PSI 3/8" x 500' Black Rubber Hose. The next level of hot water pressure washer hose. Designed for high flow (up to 8 GPM) heavy duty hot water cleaning applications. Rubber construction throughout, with a double layer of steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 500’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Black
• Maximum Temperature: 212° F.
• Bulk hose on a reel
• Ships Via Truck
• Weight 165.0 lbs

Propulse Hot Clean 6,000 PSI 3/8" x 500' Grey Rubber “Mark-Less” Hose. The next level of hot water pressure washer hose. Designed for high flow (up to 8 GPM) heavy duty hot water cleaning applications. Rubber construction throughout, with a double layer of steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 500’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey
• Maximum Temperature: 212° F.
• Bulk hose on a reel
• Ships Via Truck
• Weight 165.0 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 6’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.80 lbs

Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 6’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 2.15 lbs