Suttner America

Suttner ST-75.2 Long Range Foam Nozzle 5,000 PSI with #15 Air Injector Nozzle and 1/4" FPT Inlet. The ST-75 Long Rang foam nozzle throw foam up to 40 feet

Features
• By means of the foam head ST-75.2 different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The maximum flow is dependent on the chosen nozzle size
• 1/4” Stainless steel inlet

ST-75 Long Range Foamer with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 15
• Max Pressure: 5,000 PSI
• Flow Rate: up to 7 GPM
• Inlet: 1/4" FPT
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 20.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 25.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 10.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 10.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-458 Turbo / Rotating / Hydro Excavation #25.0 Nozzle with 1/2” Inlet is rated for up to 6,000 PSI. The increased tearing action of the rotating spray is ideal for Hydro-Excavation and hard surface applications

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 25.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 20.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals
• Food Grade

Specifications
• Max Pressure: 2,170 PSI
• Max Flow: 27.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Suttner ST-3240 Hydro Ex Inline Spray Gun 4,500 PSI 32 GPM with 1/2” FPT Inlet. The ergonomic design of the ST-3240 helps reduce fatigue

Features
• Industrial grade spray gun for the Hydro Excavation industry
• The internal components are made from stainless steel
• Straight thru gun
• Comfortable ergonomic hand grip design and reduces fatigue

Specifications
• Max Flow: 32 GPM
• Max Pressure: 4,500 PSI
• Max Temp: 212° F.
• Inlet: 1/2" FPT
• Outlet: 1/2" FPT
• Weight: 1.75 lb

1” Suttner #75.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 9 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 9 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 75.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 1.96”
• Weight: 19.20 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 12.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 15.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 25.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 31.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 31.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner #75.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 9 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 9 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 75.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 1.96”
• Weight: 19.20 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-83 Air Powered Disinfecting Cold Fogger. The ST-83 is perfect for fogging on sanitary solutions in restaurants, hotels, hospitals, nursing homes, public transportation, taxis, rental cars, agricultural and food processing facilities. The fine spray or fog pattern that this device produces allows sanitary solutions to reach all around the items and areas being cleaned. It also provides an effective and uniform wetting of the surface

Features
• It's easy to use. Fill the bottle with your sanitizing solution, attach to an air compressor and start fogging on the sanitizing solution
• Corrosion resistant stainless steel & plastic
• Inexpensive and safe application for hygienically germ-free cleaning of interiors to remove microorganisms, viruses and bacteria
• No inhalation of the disinfectant solution as rooms do not have to be entered
• The finest nebulization of active ingredients comes into the smallest gaps and into the last corner
• A compressed air connection is required 
• Uniform spray pattern with the finest droplets under 30 μm.
• Extremely productive use: e.g. 1 liter for rooms with 60 m3, room size of approx. 25 m2
• Easy dosing of the disinfectant by ml scale, (100 ml each.)
• Accessories available: adapter for 5 - 30 liter canister, further dosing nozzles from our range

Compressor Requirments:
• Commercially available compressed air systems or compressors can be used to supply the fog device with compressed air
• The compressor should provide a flow rate of 120 - 180 L / min.
• The working pressure should be at least 3 bar.
• If not available, we recommend installing a pressure reducer (item 150008010) between the compressor outlet and the ST-83.
• With this the operating pressure - working pressure on the ST-83 can be set exactly.
• Make sure that the cross-section of the hose from the compressor to the ST-83 is correct. The longer the hose, the larger its cross section should be. 20 meters hose length ID 8 mm / 100 meters hose length ID 10 mm

See ST-83 in action on YouTube

Agriculture, breeding and food industry

Medical practices, hospitals and nursing homes

Public transport, taxis and rental cars

Hotels and restaurants

Operation manual

Specifications
• Nozzle Inserts: 2 with different spray patterns
• Material: Stainless steel & plastic
• Air Inlet: 1/4" Female NPT
• Bottle:1 Litre
• Note: Air compressor required for operation (Not Included)
• Weight: 2.35 lb