Suttner America

Suttner ST-175 Stainless Steel 24” Foam & Rinse Lance 5,000 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The change-over lance ST-175 Foam & Clean is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-75 foam head for foaming. After changing over the full flow is directed thru the other pipe and a regular spray nozzle for rinsing
• Appropriate nozzle sizing at chemical injector and ST-175 allows changing from foaming to rinsing right at the lance. ST -175 Foam & Clean is compatible to ST-160 / ST-160M / ST-164 / ST-166 / ST-167
• Due to ST-175's changeable air injector nozzles the lance can be driven with all pressure washers with flow rates from 1 to 6 GPM. Nozzles with integrated jet former are required

ST-175 Foam & Rinse Lance on YouTube

Specifications
• Flow Rate: 1.0 – 6.0 GPM
• Max Pressure: 5,000 PSI
• Length: 24.0”
• Max Temp: 140° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): ST-75 Foam head (Air Injector Nozzle not included)
• Outlet (Rinse): 1/4" FPT with nozzle protector (1/4” MPT high pressure nozzle not included)
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector, air injector nozzle and 1/4" MPT nozzle required and are not included
• Weight: 2.70 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

3/4” Suttner # 12.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 15.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 25.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 31.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 31.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 10.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 12.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 15.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 20.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 25.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 30.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 30.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-83 Air Powered Disinfecting Cold Fogger. The ST-83 is perfect for fogging on sanitary solutions in restaurants, hotels, hospitals, nursing homes, public transportation, taxis, rental cars, agricultural and food processing facilities. The fine spray or fog pattern that this device produces allows sanitary solutions to reach all around the items and areas being cleaned. It also provides an effective and uniform wetting of the surface

Features
• It's easy to use. Fill the bottle with your sanitizing solution, attach to an air compressor and start fogging on the sanitizing solution
• Corrosion resistant stainless steel & plastic
• Inexpensive and safe application for hygienically germ-free cleaning of interiors to remove microorganisms, viruses and bacteria
• No inhalation of the disinfectant solution as rooms do not have to be entered
• The finest nebulization of active ingredients comes into the smallest gaps and into the last corner
• A compressed air connection is required 
• Uniform spray pattern with the finest droplets under 30 μm.
• Extremely productive use: e.g. 1 liter for rooms with 60 m3, room size of approx. 25 m2
• Easy dosing of the disinfectant by ml scale, (100 ml each.)
• Accessories available: adapter for 5 - 30 liter canister, further dosing nozzles from our range

Compressor Requirments:
• Commercially available compressed air systems or compressors can be used to supply the fog device with compressed air
• The compressor should provide a flow rate of 120 - 180 L / min.
• The working pressure should be at least 3 bar.
• If not available, we recommend installing a pressure reducer (item 150008010) between the compressor outlet and the ST-83.
• With this the operating pressure - working pressure on the ST-83 can be set exactly.
• Make sure that the cross-section of the hose from the compressor to the ST-83 is correct. The longer the hose, the larger its cross section should be. 20 meters hose length ID 8 mm / 100 meters hose length ID 10 mm

See ST-83 in action on YouTube

Agriculture, breeding and food industry

Medical practices, hospitals and nursing homes

Public transport, taxis and rental cars

Hotels and restaurants

Operation manual

Specifications
• Nozzle Inserts: 2 with different spray patterns
• Material: Stainless steel & plastic
• Air Inlet: 1/4" Female NPT
• Bottle:1 Litre
• Note: Air compressor required for operation (Not Included)
• Weight: 2.35 lb

1” Suttner # 12.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 15.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 25.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner # 31.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 31.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 2.44”
• Length: 3.94”
• Weight: 44.62 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner #75.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 9 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 9 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 75.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 1.96”
• Weight: 19.20 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1” Suttner #75.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 9 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 9 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 75.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 1” Female
• Outside Diameter (O.D.): 1.96”
• Weight: 19.20 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart