Suttner America

3/8” Suttner ST-49 Stainless Steel Rotating Sewer Jetter Nozzle, # 8.0. Does not have a forward spraying orifice, but has 3 orifices angled backwards and to the side. Slides easily into drain pipes and sewer lines flushing debris or clearing frozen pipes while attached to sewer hose. Better for removing build up from the walls of the pipe or tube.

Features
• High Quality, German engineered components
• 3 Backward ports drive the nozzle forward and flush debris
• Rotating style adds extra agitation and surface cleaning
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 3/8” Female
• Nozzle Size: # 8.0
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Outside Diameter (O.D.): .94”
• Weight: .15 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/8” Suttner ST-49.3 Mini Stainless Steel Rotating Sewer Jetter Nozzle, # 5.0. Limited (or reduced) spinning speed for higher cleaning performance. Two radial jets hit the pipe wall directly with great impact, resulting in excellent cleaning capacity. Two strategically placed retracting jets provide cleaning energy as well as the thrust in one function, resulting in a low water consumption, while maximizing cleaning and flushing away the loosened residues. Housing and Rotor are hardened stainless steel parts with grinded contact surfaces for extended lifetime

Features
• High Quality, German engineered components
• 2 Rotating radial jets (90°) to the pipe wall for best cleaning results
• 2 Rotating rear jets (45°) for forward thrust and flushing away of the waste material
• Physically small for cornering ability
• Rated at 7300 PSI and 248° F

Specifications
• Inlet: 1/8” Female
• Nozzle Size: # 5.0
• 2 Side ports, 2 Backward, 0 Forward
• Material: Stainless steel
• Maximum Pressure: 7,300 PSI
• Max. Fluid Temperature: 248º F
• Outside Diameter (O.D.): 0.47”
• Length: 1.0”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/8” Suttner ST-49.3 Mini Stainless Steel Rotating Sewer Jetter Nozzle, # 7.0. Limited (or reduced) spinning speed for higher cleaning performance. Two radial jets hit the pipe wall directly with great impact, resulting in excellent cleaning capacity. Two strategically placed retracting jets provide cleaning energy as well as the thrust in one function, resulting in a low water consumption, while maximizing cleaning and flushing away the loosened residues. Housing and Rotor are hardened stainless steel parts with grinded contact surfaces for extended lifetime

Features
• High Quality, German engineered components
• 2 Rotating radial jets (90°) to the pipe wall for best cleaning results
• 2 Rotating rear jets (45°) for forward thrust and flushing away of the waste material
• Physically small for cornering ability
• Rated at 7300 PSI and 248° F

Specifications
• Inlet: 1/8” Female
• Nozzle Size: # 7.0
• 2 Side ports, 2 Backward, 0 Forward
• Material: Stainless steel
• Maximum Pressure: 7,300 PSI
• Max. Fluid Temperature: 248º F
• Outside Diameter (O.D.): 0.47”
• Length: 1.0”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-5 Any Position Flow Switch. Mounts in any position with a free floating magnet configuration

Features:
• Can be mounted horizontal or vertical
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy brass reed switch replacement

Specifications:
• Max. Pressure: 5,070 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 7.8 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 180° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Brass
• Color: Grey
• Replaces 200005600
• Weight: 0.98 lbs

Suttner ST-5 Vertical Mount Flow Switch. Vertical mounting position and free floating brass magnet configuration

Features:
• Vertical mounting ONLY
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 4,380 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Brass
• Color: Black
• Replaces 200005500
• Weight: 0.98 lbs

Suttner ST-505 Stainless Steel Vertical Mount Flow Switch Rated to 8,700 PSI. Vertical mounting position and free floating brass magnet configuration

Features:
• Vertical mounting ONLY
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement

Specifications:
• Max. Pressure: 8,700 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Max Voltage: 250 V
• Max Current: 3 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Stainless Steel
• Color: Blue
• Weight: 0.90 lbs

Suttner ST-510 Poly Chemical Spray Gun 18.5 GPM, 365 PSI, 1/2" FPT

Features
• High Quality, German engineered components
• Reinforced polypropylene will withstand the harshest chemicals
• Gun with stainless steel V4A / AISI 316 ball being resistant to chemicals
• Ideal gun for use in soft wash applications

Specifications
• Max Pressure: 365 PSI
• Max Flow: 18.5 GPM
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• UDOR # 15.0003.13
• Weight: 0.30 lb

Features
• High Quality, German engineered components
• Through twisting the plastic housing the high or low pressure operation is continuously adjustable
• Dumps water around nozzle to lower pressure
• Nozzle housing is made of an impact resistant plastic, manufactured of corrosion resistant material

Specifications
• Max Pressure: 3,600 PSI
• Max Flow: 8 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.36 lb

Suttner ST-55 Sandblasting Kit #4.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Suttner ST-55 Sandblasting Kit #5.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 5.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #6.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 6.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #7.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 7.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #8.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 8.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Stainless steel construction for durability and stability
• Can be used in other applications

Specifications:
• Inlet: 1/4” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 7,300 PSI
• Max. Flow Rate: 21.0 GPM
• Max. Temp.: 300º F.
• Weight: 9.85 lbs.

Suttner ST-555 Professional Sandblaster #3.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 3.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #4.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #5.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 5.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #6.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 6.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #7.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 7.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #2.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 2.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart