Valley Industries

Valley Industries 90.080.004 Red 80º Flat Fan RS Series Spray Tip. Nozzles for full-field use without air induction

Specifications
• Made in acetal resin
• Pressure recommended ranges from 30 - 60 PSI
• 80º Angle
• Suitable for herbicides, insecticides and fungicides

Valley Red Rubber Handled Hitch Pin 1” x 7-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 7-1/2”
• Pin Diameter (B): 1”
• Case # B504056
• Farmex # 1508
• Speeco # P700552
• HH # 00153

Valley Red Rubber Handled Hitch Pin 1/2" x 3-5/8"

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 3-5/8”
• Pin Diameter (B): 1/2”
• Case # B504050
• Farmex # 1500
• Speeco # P700511
• HH # 00113

Valley Red Rubber Handled Hitch Pin 1-1/2” x 8-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 8-1/2”
• Pin Diameter (B): 1-1/2”
• Speeco # P700582

Valley Red Rubber Handled Hitch Pin 1-1/4” x 8-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 8-1/2”
• Pin Diameter (B): 1-1/4”
• Farmex # 1512
• Speeco # P700572
• HH # 00173

Valley Red Rubber Handled Hitch Pin 1-1/8” x 8-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 8-1/2”
• Pin Diameter (B): 1-1/8”
• Case # B504057
• Farmex # 1510
• Speeco # P700562
• HH # 00163

Valley Red Rubber Handled Hitch Pin 3/4” x 4”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 4”
• Pin Diameter (B): 3/4”
• Case # B504053
• Farmex # 1503
• Speeco # P700531
• HH # 00233

Valley Red Rubber Handled Hitch Pin 3/4” x 6-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 6-1/2”
• Pin Diameter (B): 3/4”
• Case # B504054
• Farmex # 1504
• Speeco # P700532
• HH # 00133

Valley Red Rubber Handled Hitch Pin 5/8” x 4”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 4”
• Pin Diameter (B): 5/8”
• Case # B504051
• Farmex # 1501
• Speeco # P700521
• HH # 00223

Valley Red Rubber Handled Hitch Pin 5/8” x 5-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 5-1/2”
• Pin Diameter (B): 5/8”
• Speeco # P700522

Valley Red Rubber Handled Hitch Pin 7/8” x 6-1/2”

Features:
• Red handled hitch pins are Grade 5 hardness
• Useable Length (A): 6-1/2”
• Pin Diameter (B): 7/8”
• Case # B504055
• Farmex # 1506
• Speeco # P700542
• HH # 00143

Repair Kit for SG-2218-18 and SG-2200 (New Design)

White piece does not have o-ring and seal is on the shaft

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 10”
• Length Retracted: 18.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on flange kit (Flange, pin, spring & clip)
• Mount Height: 11.0”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 13.0 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on flange kit (Flange, pin, spring & clip)
• Mount Height: 16”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.5 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 10”
• Length Retracted: 17.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Side wind
• Mount Type: Weld on tube mount, outside
• Mount Height: 11.0”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 15.5 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Side wind
• Mount Type: Weld on tube mount, outside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 17.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 10”
• Length Retracted: 17.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 11.25”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 12.0 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.0 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 15”
• Length Retracted: 23.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.5 Lbs

Valley Industries SHC-D Snapper Hose Clamp, Double Tooth

Specifications:
• Size: D
• Min. Clamp Dia.: 0.449”
• Max. Clamp Dia.: 0.511”

Valley Industries SHC-F Snapper Hose Clamp, Double Tooth

Specifications:
• Size: F
• Min. Clamp Dia.: 0.616”
• Max. Clamp Dia.: 0.707”

Valley Industries SHC-H Snapper Hose Clamp, Double Tooth

Specifications:
• Size: H
• Min. Clamp Dia.: 0.702”
• Max. Clamp Dia.: 0.801”

Valley Industries SHC-J Snapper Hose Clamp, Double Tooth

Specifications:
• Size: J
• Min. Clamp Dia.: 0.779”
• Max. Clamp Dia.: 0.899”

Valley Industries SHC-M Snapper Hose Clamp, Double Tooth

Specifications:
• Size: M
• Min. Clamp Dia.: 1.044”
• Max. Clamp Dia.: 1.198”

FEATURES:
• Inlet Connection: 3/8 Hose barb
• Overall Length: 30”
• Plastic valve body with filter in handle
• Chromed aluminum extension is 19” long with a 30° offset tip
• # 18 Tip has adjusting pattern from cone spray to straight stream
• Trigger locks for continuous operation
• Weight: 0.30 lbs

Valley / Master Mfg. Threaded Spot Sprayer Tank Lid with Lanyard.

Specifications:
• Helps keep tank clean from debris
• Compatible with basket strainer TLS-5D
• Lid Outside Diameter: 6.25" OD
• Weight: 0.35 lbs

Master Mfg / ValleySG-4507F-38-RUB15-P Spray Gun Assembly - 3/8" x 15'