We accept

Checkout

0
menu
See All 37 items
Picture of ZWD 4040G 4000PSI, 4.0GPM Comet Direct Drive Pump

ZWD 4040G 4000PSI, 4.0GPM Comet Direct Drive Pump

SKU: 6305.0900.00

Brand: Comet Pump

$277.00

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Comet ZWD4040G Industrial Duty Pump. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP


Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. We do not assume any liability or responsibility for the operation of the user’s high pressure system.


Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 17.5 lb.

 

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought
Picture of #3.5 x 15º 1/4" MPT High Pressure Ceramic Spray Nozzle

#3.5 x 15º 1/4" MPT High Pressure Ceramic Spray Nozzle

SKU: NZC15035


Mecline 15° High Pressure Threaded Spray Nozzle with Ceramic Orifice and 1/4” Male NPT


Features
• Ceramic inserts provide up to 10 times the wear life of stainless steel inserts
• Ceramic insert is resistant to wear
• The ceramic insert guarantees a more precise and stronger stream
• Stainless Steel AISI303 body


Specifications
• Flat fan jet angle: 15°
• Nozzle Size: 3.5
• Rated Pressure: 4,500 PSI
• Permissible Pressure: 5,075 PSI
• Rated Temperature: 300° F
• Inlet: 1/4” Male NPT
• Weight: 0.63 oz


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

 

  Price: $12.93
Picture of 15º x #30 Brass H-U 1/4" (M) VeeJet® Spray Nozzle

15º x #30 Brass H-U 1/4" (M) VeeJet® Spray Nozzle

SKU: H1/4U-1530


Spraying Systems 15º Brass H-U 1/4" (M) VeeJet® Spray Nozzle. As the liquid exits through the sharp V shape cut of the orifice, it forms into a flat spray pattern. The distribution is tapered from the center of the spray


Features
• Flat fan type, tapered edge spray pattern
• Consistent performance over the industry's largest range of flow rates and pressures
• One-piece design
• Uniform spray distribution with flow rates from .012 to 1237 gpm
• Operating pressures up to 500 psi

TECHNICAL DATA SHEET


Specifications
• Spray Angle: 15º
• Capacity Size: 30
• Operating Pressure: Up to 500 PSI
• Material: Brass
• Inlet Connection: 1/4" Male thread
• Length: 1.0”
• Hex: 9/16”
• Net Weight: 0.8 Oz

  Price: $2.59 8 in stock
Picture of Plastic Chemical Filter W/O Check Valve

Plastic Chemical Filter W/O Check Valve

SKU: CF-BLKSS


• Larger & heavier than most filters on the market
• Corrosion-resistant plastic
• 1/4" hose barb
• Weighted to stay on the bottom

  Price: $1.64
Picture of GP 15º x #2.0 M-Style Spray Nozzle 1/4" NPT-M

GP 15º x #2.0 M-Style Spray Nozzle 1/4" NPT-M

SKU: 915020M


General Pump 15° x #2.0 M-Style Spray Nozzle 1/4” NPT-M


Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability


Specifications
• Tip Angle: 15°
• Nozzle Size: 2.0
• Operating Pressure: 5,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $3.18
Related products
Picture of Thermal Relief Valve 140º F 1/2" MPT

Thermal Relief Valve 140º F 1/2" MPT

SKU: 8402.1701.00


Comet Pump Brass Pressure Washer Thermal Relief Valve with 1/2" Male Inlet


Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual O.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
  Price: $4.74
Picture of GP PULSAR4KHPEZ Unloader and Kit 4,050 PSI 10.5 GPM

GP PULSAR4KHPEZ Unloader and Kit 4,050 PSI 10.5 GPM

SKU: PMRPULSAR4KHPEZ


General Pump PMRPULSAR4KHPEZ- Unloader and Kit 4,050 PSI 10.5 GPM


Features
• PULSAR4KHPEZ Unloader, 4050 PSI, 10 GPM
• 3/8" Quick Coupler and 3/8" Plug Included
• 3/4" Garden Hose Inlet Fitting with 1/4" Side Port
• 3/8" Hose Barb and Clamp Keeps Hose Secure and Sealed
• Flow through design
• General Pump recommends installing a secondary relief and pressure gauge


Specifications
• Maximum Temperature: 195° F
• Max GPM: 10.5
• Maximum PSI: 4,050
• Inlet: (2) 3/8" NPT-F
• Outlet: 3/8" NPT-F
• Bypass (2) 3/8" NPT-F
• Weight: 3.15 Lbs

  Price: $88.55
ft_logo power equipment and supply

Copyright © 2024 PWMall.com. All Rights Reserved.

877-979-6255

Powered by nopCommerce