We accept

Checkout

0
Picture of # 4.0 Industrial Wet Sand Blast Kit

# 4.0 Industrial Wet Sand Blast Kit

SKU: 88.0036

Brand: MTM Hydro

Out of stock

Only $124.77

ADD TO CART
QTY:
ADD TO WISHLIST
Customer Product Rating
Product Description


Heavy duty #4.0 Industrial wet sand blast kit. Removes coatings from almost any surface. Also works for graffiti removal and paint surface preparation

FEATURES:
• Nozzle Size: # 4.0
• Works on a variety of surfaces
• Water and sand mixture reduces blowing of sand particles
• Can be used with a variety of sand grades

SPECIFICATIONS:
• Tungsten Carbide nozzle
• 5,000 PSI max. pressure
• 8 GPM maximum flow
• 195° F max. temperature.
• Note: This Sand Blaster needs a minimum working flow of 4 GPM @ 3000 PSI

KIT CONTENTS:
• Sand blast head with tungsten carbide nozzle
• 24" Sand probe
• 25' Clear PVC nylon braided 3/4”sand suction hose
• #4.0 x 0º 1/4" MPT Spray Nozzle
• 1/4 QC plug
• 1 Roll Teflon Tape
Note: Assembly is required
• Weight: 9.1 lbs


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

 

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

Inlet Washer with Cone Filter 304 SS 50/60 Mesh

SKU: 10373


• Inlet Washer with Cone Filter 304SS 50/60 Mesh
• For 3/4 FGH garden hose inlet connectors
• Replaces AR7369

Price: $0.27

#4.0 x 0º 1/4" MPT Spray Nozzle

SKU: 900040M

• 0º MPT Style Threaded Nozzle
• Nozzle Size: 4.0
• Hardened Stainless Steel
• 5,000 PSI max. pressure
• 1/4" Male NPT inlet
• Weight: 0.05 lbs

Price: $3.58

QD Plug, Hardened Steel Zinc Plated 3/8 x 3/8 NPT-M 4,000 PSI

SKU: D11009


General Pump D11009 Quick Disconnect Coupler Plug Hardened Steel Zinc Plated 3/8” x 3/8" NPT-M 4,000 PSI


Features:
• Quick disconnect design
• Hardened Steel Zinc Plated


Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces QCP2MS
• Weight: 0.10 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
Price: $0.96

6,000 PSI Hose 3/8" x 50' Grey Non-Marking

SKU: 989400060

Propulse Hot Clean 6,000 PSI 3/8" x 50' Grey Rubber “Mark-Less” Hose. The next level of hot water pressure washer hose. Designed for high flow (up to 8 GPM) heavy duty hot water cleaning applications. Rubber construction throughout, with a double layer of steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range.


ProPulse, a Schieffer Company, backed by more than 90 years of innovation


Features:
• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 50’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 16.0 lbs

Price: $78.36