We accept

Checkout

0
Picture of 3600PSI, 3.5GPM Annovi Reverberi Direct Drive Pump

3600PSI, 3.5GPM Annovi Reverberi Direct Drive Pump

SKU: RRV3.5G36D-F24

Brand: Annovi Reverberi - AR North America

$330.83

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise


Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft


Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 11.45 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

Annovi Reverberi Pump Oil (16 oz)

SKU: AR64516

Annovi Reverberi AR64516 16 oz Crankcase Oil is formulated for AR and most other triplex pumps. Also used on AR Blue Clean Models: AR610, AR620, AR630 and AR767


Specifications:
• Special blend, 30W viscosity, non-detergent crank case lubricating oil
• Exceeds wear prevention requirements of all major hydraulic pump mfg's
• Contains anti-wear, rust inhibitor and deoxidizer additives
• Packaged in 16 oz bottles
NOT FOR USE IN CAT PUMPS or AXIAL PUMPS
• Weight: 1.0 Lbs.

  Price: $8.02

Garden Hose Inlet Connector with Cone Filter 1/2" MPT

SKU: 8105.0601.00


Valley Industries Garden Hose Adapter with Cone Filter


Specifications:
• Stainless steel GHT tension spring on garden hose adapter
• Material: Brass
• 50 Mesh cone filter
• Inlet: Female garden hose (FGH)
• Replaces: AR7300
• Outlet: 1/2" Male

  Price: $4.22

Thermal Relief Valve 145º F 1/2" MPT

SKU: 100558

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 1/2" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.


Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 1/2" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

  Price: $5.59

AR Gymatic 3/B Unloader XM, XR, RK & RR (Injector)

SKU: AR20400


Bolt-On Unloader Fits AR SXMA, SXMV, XM, XMA, XMV, XR, RK, RKA, RKV, RR, RRA, RRV Pumps


Specifications:
• Maximum Pressure: 3,650 PSI
• Max. Volume: 5.5 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body
• Built-In bypass channel
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Injector Size: 2.0 (4.0 - 5.5 GPM)
• 2.5 lbs. Weight

  Price: $103.47