We accept

Checkout

0
Picture of Suttner ST-75 Foam Nozzle, 4000 PSI, #5.0, 1/4" F

Suttner ST-75 Foam Nozzle, 4000 PSI, #5.0, 1/4" F

SKU: 200075552

Brand: Suttner America

Only $43.48

ADD TO CART
QTY:
ADD TO WISHLIST
Customer Product Rating
Product Description


Suttner ST-75 Brass Foam Head 4,000 PSI with #5.0 Air Injector Nozzle and 1/4" F Inlet. The ST-75 produces thick foam for an easy and safe application and to save on chemical usage by reducing splash and drift of chemicals


Features
• By means of the foam head ST-75 different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The flat spray nozzle can be infinitely adapted from the vertical position to the horizontal one
• The maximum flow is dependent on the chosen nozzle size
• By means of the integrated air injector in the foam head the air is sucked in on the face side
• Independent of the length of the lance a constant foam quality is guaranteed
• The spraying result is especially even as a high quality foam nozzle insert is used
• With stainless steel "wool" like foam pad

ST-75 with ST-160 Chemical Injector on YouTube


Specifications
• Air Injector Nozzle Size: 5.0
• Max Pressure: 4,000 PSI
• Flow Rate: 1 - 6 GPM
• Max Temp: 212° F.
• Inlet: 1/4" Female
Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.31 lb

 

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

 

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

 

Customers who bought this item also bought

3/8" MPT Reusable Hose Coupling

SKU: 3016

JE Adams 3/8" MPT Reusable Hose Coupling


Features:
• Use on 3/8" ID (inside diameter) rubber/wire braided hose
• Reverse thread female section onto your hose, thread male section into female to secure coupling to hose.
• You can connect the hose coupling directly to a variety of female threaded guns, sockets, or swivels.
• Adapt and repair hoses in the field


Specifications:
• Material: Plated steel
• Outlet: 3/8”Male NPT
• Weight: 4.0 oz

Price: $10.50

Suttner ST-160M Stainless Single Chemical Injector w/Metering Valve, #4.0, 3/8"

SKU: 200160602


Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.0, 5000 Psi, 3/8" F x 3/8” M


Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions


Specifications
• Orifice: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb


Please use Nozzle Chart to determine proper nozzle size


Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

Price: $137.31

Delavan Diaphragm Pump 12V, 60PSI, 5.0GPM, BYP

SKU: 5850-111E


Delavan PowerFLO™ 5850 Series 5.0 GPM 60 PSI Diaphragm Pump. Bypass Design – Continuous operation


Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase


Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 6.0 – 16
• Duty Cycle: See Heat Rise graph


Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel


NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act


Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor


Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Max Pressure: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Weight: 6.0 lbs

 

Price: $127.78

1/4" x 150' Blue Carpet Cleaning Solution Hose 3,000 PSI

SKU: 535100118


Propulse Carpet Clean 3,000 PSI 1/4" x 150' Blue Smooth “Mark-Less” Rubber Hose. Carpet cleaners’ preferred choice for hot water solution hoses. Smooth blue and less marking cover with a seamless heat and chemical resistant tube ideal for the commercial carpet cleaning professional.


ProPulse, a Schieffer Company, backed by more than 90 years of innovation


Features:
• Assembled in USA with high quality components
• Suitable for commercial carpet cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Smooth, “Mark-Less” with printed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 1/4" ID
• Length: 150’
• Working (Maximum): Up to 3,000 PSI
• Burst (Minimum): 9,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 1/4" MPT (solid) )
• Heavy duty black bend restrictors on both ends.
• Weight 19.15 lbs

 

Price: $134.77