We accept

Checkout

0
Picture of Cleantecs Twister-Milling 0.98 OD Sewer Nozzle 1/8", # 4.0, 2175 PSI

Cleantecs Twister-Milling 0.98 OD Sewer Nozzle 1/8", # 4.0, 2175 PSI

SKU: 99.21020.25/040

Brand: Cleantecs

Only $136.29

ADD TO CART
QTY:
ADD TO WISHLIST
Customer Product Rating
Product Description


Cleantecs’ 1/8” Twister-Milling #4.0 Sewer Nozzle is rated up to 2,175 PSI and only 0.98 OD. The twister-milling-nozzle is Cleantecs’ universal drain pipe cleaning nozzle suitable for canals with a pipe diameter of .984” - 2.36” which are most common in indoor applications


Features
• Using the integrated rotor nozzle, the twister-milling-nozzle mills through the obstruction in the pipe and propels itself forward through the obstruction with rotor jets at the same time, flushing out the remains of the dissolved contaminants
• The pipe wall is also cleaned from further debris
• The vibrations generated by the cleaning head significantly facilitate the fast penetration of the twister-milling-nozzle in bends. So far, several work steps and types of nozzles were required for cleaning
• As a further benefit, good cleaning results are already achieved at water flow rates starting from 1.85 GPM

See Twister-Milling nozzle in action on YouTube


Specifications
• Inlet: 1/8” Female
• Nozzle Size: # 4.0
• Spray Angle: 20°
• Maximum Pressure: 2,175 PSI
• Max Temperature: 104° F
• Max Flow Rate: 7.93 GPM
• Outside Diameter (O.D.): .98”
• Weight: .10 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

 

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.