3/8” Suttner # 5.5 ST-49 Laser Sewer Nozzle 1 Front 3 Rear 4,200 PSI.
Features• High Quality, German engineered components• 1 Front jet for penetrating of completely clogged pipes and frozen pipelines • 3 Rear jets (30°) for maximum thrust and simultaneously, a flushing away of the waste material• Stainless steel• Works best on 4" to 8" Pipes
Specifications • Nozzle Size: # 5.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Inlet: 3/8” Female• Outside Diameter (O.D.): .92”• Weight: 1.30 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
1/4” Suttner ST-49 “Grease Ball” Sewer Nozzle # 8.0, 8 Rear 7,252 PSI.
Features• High Quality, German engineered components• 8 Rear jets 0.6 mm for extreme thrust and highest wall coverage of the pipe• Designed for the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes, too• Nozzle drilling as stepped bore for best protection against mechanical impact• Hardened stainless steel • Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 8.0• Material: Stainless steel• Maximum Pressure: 7,252 PSI• Inlet: 1/4” Female• Outside Diameter (O.D.): .97” • Length: .84” • Weight: .08 lb
General Pump D10003 Quick Disconnect Coupler Socket Brass 3/8” x 3/8" NPT-F 4,000 PSI
Features: • Quick disconnect design• Brass• EPDM O-Ring
Specifications: • Quick Disconnect Coupler: Socket• Body Material: Brass• Socket Size: 3/8"• Thread: 3/8” NPT-F• Max Temp: 175°• Max Operating Pressure: 4,000 PSI• Replaces QCS2FB• Weight: 0.20 lb
3/8” SJNR General Pump # 4.5 Rotating Sewer Jet Nozzle 5,000 PSI.
Features• Side ports impact the sides of the pipe• Polishes and maximizes line recovery• Rear facing nozzles advance hose through pipe• Heat-treated Stainless Steel nozzles are wear and corrosion resistant• Great for pipe, sewer and drain cleaning• Compact design allows for maneuverability and cornering within pipes• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
Specifications • Nozzle Size: # 4.5• Material: Stainless steel & Brass• Maximum Pressure: 5,000 PSI• Inlet: 3/8” NPT-F• Outside Diameter (O.D.): .87” • Length: 1.42”• Weight: 1.8 oz
Accutek® S1020-CB Steel Adapter 3/8 Female Pipe x 1/4 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.
Specifications:• Applications - Water, Oil, Air • Working Pressure: 4,000 PSI• Burst Pressure: 16,000 PSI• Working Temperature: -65°F (-54°C) to 250°F (120°C) • Pipe threads must be sealed using approved thread sealant• Weight: 0.13 lbs