1/4” Suttner # 12.0 ST-49 Laser Sewer Nozzle 1 Front 3 Rear 4,200 PSI.
Features• High Quality, German engineered components• 1 Front jet for penetrating of completely clogged pipes and frozen pipelines• 3 Rear jets (30°) for maximum thrust and simultaneously, a flushing away of the waste material• Stainless steel• Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 12.0• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Inlet: 1/4” Female• Outside Diameter (O.D.): .75”• Weight: .60 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Features• Forward jet breaks up clogs & debris• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line• Corrosion resistant stainless steel construction
Specifications • Inlet: 3/8” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Max. Fluid Temperature: 300º F• Weight: 1.4 oz.
ProPulse, a Schieffer Company, backed by more than 90 years of innovation
MADE IN USAEvery foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials
Features:• Suitable for consumer and commercial applications• Reinforcement: One layer of polyester braid• Cover: Thermoplastic smooth finish with printed lay line• Burst (Minimum): 2.5:1 working pressure• Easily slides into sewer lines and pipes• Glossy black abrasion resistant cover
Specifications: • Inner Diameter: 1/4” ID• Length: 50’• Working (Maximum) Pressure: 4,400 PSI• Burst (Minimum): 11,000 PSI • Max. Fluid Temperature: 160º F.• Inlet: 1/4” MPT (Swivel)• Outlet: 1/4” MPT (Solid)• Weight 3.4 lbs
3/8” Suttner # 8.5 ST-49 Laser Sewer Nozzle 1 Front 4 Rear 4,200 PSI.
Features• High Quality, German engineered components• 1 Front jet for penetrating of completely clogged pipes and frozen pipelines • 4 Rear jets (30°) for maximum thrust and simultaneously, a flushing away of the waste material• Stainless steel• Works best on 4" to 8" Pipes
Specifications • Nozzle Size: # 8.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Inlet: 3/8” Female• Outside Diameter (O.D.): .92”• Weight: 1.30 oz
PA RB 65 Red Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet and Stainless Steel Piston
Features• Low pressure washdown gun with conical/pencil jet controlled by the trigger• Adjustable screw to vary cone width from 0° to 60°• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.• Plastic trigger protected by hand guard• Minimum fatigue for trigger opening and use• Internal structure in brass and Sst• Ergonomic construction• Inlet swivel connection
Specifications Sheet
Specifications • Rated Pressure: 350 PSI• Rated Flow Rate: 16.0 GPM• Rated Temp: 195° F.• Max Temp Continuous Use: 140° F. • Casing Color: Red• Seals Material: Viton• Piston Material: aisi303 Sst• Swivel Inlet: 1/2" Bsp F• GP #: YG1635SR• Weight: 37.39 oz