We accept

Checkout

0
Picture of General TSS1511 Pump Made Ready 3,500 PSI 4.0 GPM Solid Shaft

General TSS1511 Pump Made Ready 3,500 PSI 4.0 GPM Solid Shaft

SKU: PMRTSS1511

Brand: General Pump

$581.25

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


3,500 PSI 4.0 GPM General TSS1511 Solid Shaft Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:

• General TSS1511 Pump with 24MM solid shaft
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165º F
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet


COMPONENTS:

• General TSS1511 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting rails included
Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 35.55 lb

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

General Pump Series 100 Oil, 16 oz. Bottle

SKU: 100295


General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures


Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance


Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

  Price: $5.73

GP 25º x #2.0 M-Style Spray Nozzle 1/4" NPT-M

SKU: 925020M


General Pump 25° x #2.0 M-Style Spray Nozzle 1/4” NPT-M


Features
• 5,000 PSI operating pressure
Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability


Specifications
• Tip Angle: 25°
• Nozzle Size: 2.0
• Operating Pressure: 5,000 PSI
• Connection: 1/4” NPT-M
• BE # 85.225.020
• Weight: 0.05 oz


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $3.18

5,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge

SKU: 2141GXB5000


Valley Industries Series 41 Single Scale OEM 5,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration


Features:
• Dial Range: 0 – 5,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

 

  Price: $10.45

QD Plug, Hardened Steel Zinc Plated 3/8 x 3/8 NPT-F 4,000 PSI

SKU: D11008


General Pump D11008 Quick Disconnect Coupler Plug Hardened Steel Zinc Plated 3/8” x 3/8" NPT-F 4,000 PSI


Features:
• Quick disconnect design
• Hardened Steel Zinc Plated


Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces QCP2FS
• Weight: 0.10 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
  Price: $0.99