We accept


Picture of General Pump Industrial Foot Valve 5000 PSI, 10.0 GPM

General Pump Industrial Foot Valve 5000 PSI, 10.0 GPM

SKU: DFV5010

Brand: General Pump

Only $108.87

Customer Product Rating
Product Description

General Pump DFV5010 Industrial 5,000 PSI 10 GPM Foot Valve. Foot controlled valves allow both hands to be free to control the sewer hose. Pulling sewer hose back and forth flushes the pipes

• Offers hands-free operation!
• Sturdy, heavy-gauge steel construction
• Powder coated for durability
• Reliable design
• Protected pedal guards against accidental activation
• Includes 2103331 Fitting Kit

• Maximum Pressure: 5,000 PSI
• Max. Flow Rate: 10.0 GPM
• Max. Temp.: 320º F
• Inlet: 3/8-18 NPT-F
• Outlet: 1/4-18 NPT-F outlet
• Weight: 19.6 lbs.

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

6,000 PSI Hose 3/8" x 50' Black

SKU: 989400027

Propulse Hot Clean 6,000 PSI 3/8" x 50' Black Rubber Hose. The next level of hot water pressure washer hose. Designed for high flow (up to 8 GPM) heavy duty hot water cleaning applications. Rubber construction throughout, with a double layer of steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

• Hose Inner Diameter: 3/8" ID
• Length: 50’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Black
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 15.5 lbs

  Price: $72.21

Annovi Reverberi Pump Oil (16 oz)

SKU: AR64516

Annovi Reverberi AR64516 16 oz Crankcase Oil is formulated for AR and most other triplex pumps. Also used on AR Blue Clean Models: AR610, AR620, AR630 and AR767

• Special blend, 30W viscosity, non-detergent crank case lubricating oil
• Exceeds wear prevention requirements of all major hydraulic pump mfg's
• Contains anti-wear, rust inhibitor and deoxidizer additives
• Packaged in 16 oz bottles
• Weight: 1.0 Lbs.

  Price: $6.79

3/8" x 100' Sewer Jetter Hose 4,000 PSI Black

SKU: 686200021

Propulse Jetter Clean 3/8” X 100’ Lateral Line and Drain Cleaner Sewer Hose. Ideal for consumer and commercial sewer jetters with operating pressures of 4,000 PSI or less. Jetter Clean hoses offer optimum flexibility and lightweight construction.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

• Inner Diameter: 3/8” ID
• Length: 100’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Optimal Recommended Flow Rate: Up to 5.0 GPM
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 11.9 lbs

  Price: $124.85

Laser Sewer Nozzle 3/8", # 4.5


3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 4.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.

• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

• Inlet: 3/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $7.21