Suttner 38” ST-53.2 Stainless Steel Dual Lance 5,800 PSI With Brass Soap Nozzle and Nozzle Protectors. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure
Features• The serious high pressure spray contractors choice• High Quality, German engineered components• Stainless steel construction• Features our comfortable ergonomic shaped cool & compact molded grip resistant to heat• Suitable for corrosive chemicals• Simple Hi/Low pressure adjustment valve• Premium dual-purpose lance that adds extreme versatility to your cleaning tools and accessories• Lance is equipped with 65° x #30 low pressure brass soap nozzle• Nozzle protectors included • Optional stainless steel soap nozzle available
Specifications • Max Pressure: 5,800 PSI• Length: 38.5”• Max Temp: 302° F. • Lance & Valve Material: Stainless steel• Inlet: 1/4" Male NPT• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle• Note: 1/4” MPT Nozzle not included• Weight: 2.75 lb
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer
Features• 20% injection draw rate• Made in the USA• A cost effective solution to your chemical application needs
Injector Specifications:• Size: # 2.1 mm (3.0 to 5.0 GPM)• Max Operating Pressure: 4,500 PSI• Max Temperature: 195° F• Inlet: 3/8” NPT-M• Outlet: 3/8” NPT-M • Chemical Port: 1/4” Hose Barb• Materials: Brass, Stainless Steel, Viton • Note: If between sizes, choose the smaller injector size• Weight: 0.30 lbs
Features• High Quality, German engineered components• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns• Proper spray angle for optimal positioning of pressure points• Unitized valve for easy repair• Forged brass housing for maximum strength
Specifications • Max Pressure: 5,000 PSI• Max Flow: 12.0 GPM• Max Temp: 300° F.• Inlet: 3/8" Female NPT• Outlet: 1/4" Female NPT• Weight: 1.22 lb
General Pump D10079 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-M 6,000 PSI
Features: • Quick disconnect design• 304 Stainless steel
Specifications: • Quick Disconnect Coupler: Plug• Body Material: 304 Stainless steel• Plug Size: 3/8"• Thread: 3/8” NPT-M• Max Temp: 175°• Max Operating Pressure: 6,000 PSI• Replaces QCP2MSS• Weight: 0.11 lb