Bell housing for RC, RR Series
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump 25° x #5.5 M-Style Spray Nozzle 1/4” NPT-M
Features• 5,000 PSI operating pressure• Made in the USA• General Pump High Pressure Spray Tips feature a two piece design• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability• The contour control nozzle chamber eliminates the need for flow straighteners • Resistant to most chemical• Laser marked for clarity and durability
Specifications• Tip Angle: 25°• Nozzle Size: 5.5• Operating Pressure: 5,000 PSI• Connection: 1/4” NPT-M• Weight: 0.05 oz
Please use Nozzle Chart to determine proper nozzle size
General Pump 100723 6,000 PSI Safety Relief Valve 3/8” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system
Features:• High pressure safety valve: 2,500 – 6,000 PSI relief pressure • One model fits all pressures - no springs to change• Less “whistling” and chatter than competing brands• Highly accurate over full range of pressures• Fits any brand of pump• Designed and made in the USA
Specifications:• Adjustable Range: 2,500 - 6,000 PSI• Max Volume: 6 GPM • Discharge: Side• Hose Barb: 1/4” • Max Temperature: 32 - 150° F • Inlet: 3/8" NPT-M• Body Dimensions: 2.6” x .875” Hex• Weight: 0.325 lbs
Features:• Latest in design and technology• New crankcase style• High strength forged brass manifold for long term use• NEW ceramic plungers, thicker wall to help prevent thermal shock• Stainless steel valves• Side mount valve seat o-rings• High quality high pressure seals• NEW low pressure seal with built in scraper• Two piece piston guides• NEW connecting rod with 12% more load surface• Large side cover sight glass• Oversized bearings• Rear cover oil drain• Forged, precision ground crankshaft
Specifications: • Max. Volume: 3.5 GPM• Max. Discharge Pressure: 3,000 PSI • Max. Pump Speed: 1,750 RPM• Shaft Diameter: 24mm Solid• Max. Horsepower Requirements: 7.2 EBHP • Max. Fluid Temp.: 140° F.• Inlet Ports (2): 1/2" Female• Outlet Ports (2): 3/8" Female• Oil capacity: 13.35 oz• Weight: 17.0 lb.
General Pump 40° x #3.5 M-Style Spray Nozzle 1/4” NPT-M
Specifications• Tip Angle: 40°• Nozzle Size: 3.5• Operating Pressure: 5,000 PSI• Connection: 1/4” NPT-M• Weight: 0.05 oz
Copyright © 2023 PWMall.com. All Rights Reserved.