We accept

Checkout

0
Picture of 3/8 Male Pipe x 3/8 Female Pipe 90° Street Elbow Steel

3/8 Male Pipe x 3/8 Female Pipe 90° Street Elbow Steel

SKU: S1016-C

Brand: Fairview USA Inc.

$2.28

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Accutek® S1016-C Steel 90° Street Elbow 3/8 Male Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.21 lbs

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

1/2" X 18" Schedule 80 PVC Soft Wash Lance/Wand

SKU: 205-180


1/2" X 18" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends


Specifications
• Size: 1/2" ID
• Length: 18"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.30 lb

 

  Price: $2.63

1/2 Male Pipe x 1/2 Female Pipe 90° Street Elbow Steel

SKU: S1016-D


Accutek® S1016-D Steel 90° Street Elbow 1/2 Male Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.36 lbs

  Price: $3.44

MTM PF22.2 Professional Foam Cannon W/ Adjustable Air Intake & Fan - New Bottle

SKU: 14.7022


NEW MTM Hydro 14.7022 PF22.2 Professional Foam Cannon Adjustable Air Intake and Fan with New Bottle Design Stands Up On Its Own. The MTM Hydro Foam Cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam

Features:
• Adjustable Spray Pattern (horizontal or vertical)
• Adjustable Fan Blades (jet-wide)
• Adjustable chemical injection knob
• Single cast plated brass body
• New stand up bottle
• Replaceable filter
• M22 and QC plug fittings included
• Approved For auto, RV, marine detailing agriculture and home cleaning

Note:
• The 1.1mm (3.0) nozzle will accommodate a variety of pressure washers typically in the lower GPM/PSI spectrum. The 1.1mm orifice will fit most residential pressure washers much more accurately than the installed 1.25mm (3.5) orifice and provide better foam from your MTM Foam Cannon
• The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit
• Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice
• For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass
• You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine
• MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice
• Additional orifice sizes and replacement items available for purchase

Specifications:
• Min. Flow Rate: 1.4 GPM
• Max. Flow Rate: 5.3 GPM
• Min. Pressure: 1,100 PSI
• Max. Pressure: 5,000 PSI
• Max. Temp.: 140°
• Nozzle Size: #3.5 / 1.25mm (Installed), #3.0 / 1.10mm included
• 32oz Grey stand up bottle
• Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
• Weight: 1.10 lbs.

  Price: $89.99 Free Shipping

GP High Draw 20% Fixed Chemical Injector MxM #2.1

SKU: 100775


General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer


Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs


Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

  Price: $9.95