We accept


Picture of 1/2 MPT x 2-1/2" Brass Long Nipple

1/2 MPT x 2-1/2" Brass Long Nipple

SKU: 113-D2-1/2

Brand: Fairview USA Inc.


Product Description

Fairview 1/2 MPT x 2-1/2” Brass Long Nipple. Fairview's Brass Long Pipe Nipples are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP



• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.15 lbs

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

3/8" Black BRAID-Lock 300 PSI Push-On Hose

Kuriyama BL-06BK 3/8” Black BRAID-Lock™ Non-Conductive Braided Construction 300 PSI Push-On Hose

Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC
MSHA Approved Flame Resistant Cover
Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure
Easy to couple - no tools required
RMA Class "A" tube and cover oil resistance
Wide range of applications where performance and ease of assembly are demanded

• PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved
• Braided Textile - Optimum Angle for Push-On Fitting Retention
• Black Nitrile - RMA Class A oil resistance

• Air Tools
• Low Pressure Pneumatic and Hydraulic Systems
• Lubricating oils/diesel fuel
• Robotic Welders in assembly where weld spatter is present
• Water lines in plastic molding industry

• Color: Black
• Nominal ID: 3/8”
• Nominal OD: 0.61”
• Working Pressure: 300 PSI
• Service Temperature [Min]: -30º F
• Service Temperature [Max]: 180º F
• Weight: 0.12 lbs/ft

  Price: $1.42

3/8 ID x 3/8 MPT Brass Hose Barb Fitting

SKU: 125-6C

Fairview 125-6C 3/8 Hose ID x 3/8 Male Pipe Brass Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.06 lbs

  Price: $1.48

Aluminum Water Inlet Filter, 1/2" FPT Inlet, 1/2" MPT Outlet, Two 1/4" Side Ports

SKU: 8402.0410.00

Comet Pump Aluminum Water Inlet Filter. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

• Aluminum housing with removable plastic cap for easy cleaning
• 50 Mesh cuffed filter

• Max Pressure: 170 PSI
• Max Flow: 10.0 GPM
• Aluminum body
• Inlet: 1/2” Female
• Outlet: 1/2" Male
• Side Ports (2): 1/4" Female
• Weight: 0.45 Lbs

  Price: $11.12

3/8 ID x 3/8 MPT Brass Grip-Tite Fitting

SKU: 725-6C

Fairview 725-6C 3/8 Hose ID x 3/8 MPT Brass Grip-Tite Fitting. Grip-Tite Push-On style brass hose barbs are recommended for general purpose air, fuel, lube, Oil Lines, water and other low pressure applications. CA360 brass

• Working Pressure: 300 PSI
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• When used with Grip-Tite or similar push-on hose, no clamps are needed
• Weight: 0.08 lbs

  Price: $1.80