General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

General Pump 3/8" 5,000 PSI Stainless Steel Quick Disconnect Fittings (1 Plug & 1 Socket)

Features:
• Quick disconnect design
• Body Material: 304 Stainless steel
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler socket with EPDM O-ring
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler plug
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Works with standard quick connects
• Weight: 0.30 lb

General Pump D10119 3 Way Brass Unloader Manifold Block, 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass

Accutek® S1022-C Steel Male Hex Nipple 3/8 Male Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.09 lbs