PA PR16 / General Pump YPRSWITCHXL 4,060 PSI Pressure Switch with 580 PSI (Black) activation, 1/4" NPT-M stainless steel inlet and 67" wire. Electro-mechanical device, which, upon reaching a pre-set pressure (580 PSI) , opens or closes an electrical control contact
Specifications• Activation (Black) PSI: 580• Max. Voltage: 250• Permissible Pressure: 4,060 PSI• Rated Temp: 165° F• Max. Curr. Strength: 16 (A) – resistive load - 6 (A) – inductive load • Electrical insulation: 55 IP• Connection Material: Stainless Steel• Cable Length: 67" (1200 mm)• Electric Wire: 3 x 1 mm• Inlet: 1/4" NPT-M• Weight: 8.26 oz.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
PA PR16 / General Pump YPRESSWITCH1535 5,000 PSI Pressure Switch with 360 PSI (Red) activation and 3/8" BSP-M stainless steel inlet. Electro-mechanical device, which, upon reaching a pre-set pressure (360 PSI) , opens or closes an electrical control contact
Specifications• Activation (Red) PSI: 360• Max. Voltage: 250• Permissible Pressure: 5,000 PSI• Rated Temp: 165° F• Max. Curr. Strength: 16 (A) – resistive load - 6 (A) – inductive load • Electrical insulation: 55 IP• Connection Material: Stainless Steel• Cable Length: 47" (1200 mm)• Electric Wire: 3 x 1 mm• Inlet: 3/8" Bsp M• Weight: 6.84 oz.
General Pump 100438 Capillary Style 86° - 195° Adjustable Thermostat. Probe Style Thermostat Insulated SS Capillary Copper Immersion Bulb (UL/CSA approved), 16(4)A-380V Electric Rating
Features:• Panel mounted, dual scale knob.• Rapid response, ± 5° F• 60 Inch capillary tube with bulb rated to 4,000 PSI• UL/CSA approved
Specifications Sheet
Specifications:• Temp Range: 86°- 195º F• Max. Pressure: 4,000 PSI • Electrical Rating AC: 120VAC-20A, 240VAC-20A, 120/240VAC-1/4HP• Sensing Element: Copper Bulb• UL/CSA Approved: Yes• Weight: 0.40 Lb
General EZ4040G 4000PSI, 4.0GPM Pump is designed to direct drive on gasoline engines ranging from 9 -13 HP
Features:• Standard SAE J609 gasoline mounting flange for up to 13 hp engines• Forged brass manifold with an exclusive lifetime warranty and 3:1 hydrostatic rating• Die-cast, anodized aluminum oil-bath crankcase• Innovative one-piece plunger design to eliminate water entering crankcase • Premium roller bearing • 5% reduction in crankcase load compared to standard 3,000 PSI, 15 mm pumps • Unitized stainless steel inlet and discharge valves
Specifications:• Triplex Plunger Pump• Direct Drive with Gas Flange 9.0-13.0 HP SAE• Max. Volume: 4.0 GPM• Max. Discharge Pressure: 4,000 PSI• Max. Pump Speed: 3,400 RPM• Shaft Diameter: 1” Hollow• Max. Horsepower Requirements: 14.54 GHP• Max. Fluid Temp.: 165 degrees F.• Inlet Ports (2): 1/2-14 BSPP-F • Discharge Ports (2): 3/8-19 BSPP-F• Drive Side: Standard right• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation• Weight: 20.0 lb.