1/4” SJNR General Pump # 4.0 Rotating Sewer Jet Nozzle 5,000 PSI.
Features• Side ports impact the sides of the pipe• Polishes and maximizes line recovery• Rear facing nozzles advance hose through pipe• Heat-treated Stainless Steel nozzles are wear and corrosion resistant• Great for pipe, sewer and drain cleaning• Compact design allows for maneuverability and cornering within pipes• High pressure nozzles are sized to match the flow and pressure specifications of the equipment• Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 4.0• Material: Stainless steel & Brass• Maximum Pressure: 5,000 PSI• Inlet: 1/4” NPT-F• Outside Diameter (O.D.): .67” • Length: 1.34”• Weight: 1.4 oz
Please use Nozzle Chart to determine proper nozzle size
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Features• Forward jet breaks up clogs & debris• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line• Corrosion resistant stainless steel construction
Specifications • Inlet: 1/4” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Max. Fluid Temperature: 300º F• Weight: 0.6 oz.
Twist Coupler Plug, 1/4" FPT x M22-14MM M
Features:• Precision machined
Specifications:• Max. Pressure: 4,000 PSI• Max. Flow: 10.0 GPM• Material: Brass• Inlet: 1/4” FPT• Outlet: Male M22-14MM M
1/4” General Pump # 4.0 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.
Features• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs• 3 Rear (25°) facing nozzles advance hose through pipe• Excellent for cutting through roots, dirt and debris• High pressure nozzles are sized to match the flow and pressure specifications of the equipment• Heat-treated Stainless Steel nozzles are wear and corrosion resistant• Great for pipe, sewer and drain cleaning• Compact design allows for maneuverability and cornering within pipes• Works best on 2" to 4" Pipes
Specifications • Nozzle Size: # 4.0• Material: Stainless steel• Maximum Pressure: 5,000 PSI• Inlet: 1/4" NPT-F• Outside Diameter (O.D.): .63”• Weight: .05 lb
ProPulse, a Schieffer Company, backed by more than 90 years of innovation
MADE IN USAEvery foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials
Features:• Suitable for consumer and commercial applications• Reinforcement: One layer of polyester braid• Cover: Thermoplastic smooth finish with printed lay line• Burst (Minimum): 2.5:1 working pressure• Easily slides into sewer lines and pipes• Glossy black abrasion resistant cover
Specifications: • Inner Diameter: 1/4” ID• Length: 200’• Working (Maximum) Pressure: 4,400 PSI• Burst (Minimum): 11,000 PSI • Optimal Recommended Flow Rate: Up to 2.5 GPM• Max. Fluid Temperature: 160º F.• Inlet: 1/4” MPT (Swivel)• Outlet: 1/4” MPT (Solid)• Weight 12.6 lbs
Copyright © 2023 PWMall.com. All Rights Reserved.