3,045 PSI 3.4 GPM General EP1508G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box PUMP:• General EP1508G8 Pump with SAE J609 Gas Flange• Direct Drive with Gas Flange 9.0-13.0 HP SAE • Max. Volume: 3.4 GPM• Max. Discharge Pressure: 3,045 PSI • Max. Pump Speed: 3,400 RPM• Shaft Diameter: 1” Hollow• Max. Horsepower Requirements: 10.6 GHP • Max. Fluid Temp.: 165º F• New Forged brass manifold , increases working pressure to 4,000 PSI• Solid ceramic plungers with dual guide systemCOMPONENTS: • General EP1508G8 Triplex Plunger Pump• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM • Thermal relief valve• Safety relief valve• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port• 3/8” QC brass socket and 3/8” QC Plug Included• Mounting bolts• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted • Weight: 19.90 lb
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Valley PK-SG-850X Heavy Duty 4,000 PSI Pressure Washer Spray Gun & Lance Assembly
Features:• 3/8” QC Plug Inlet & 1/4” QC Socket Outlet• Comfortable rubber gripped handle• Removeable nozzle holder with clip• Side handle for firm grip on spray gun
Specifications:• Max Pressure: 4,000 PSI• Max Flow: 8.0 GPM• Max Temperature: 200° F• Trigger Gun Inlet: 3/8” QC plug• Outlet: 1/4" Brass QC socket (accepts QC color coded nozzles)• Assembled Length: 42”• Weight: 3.6 lbs
Comet 4,000 PSI Quick Connect 2.5" Pressure Gauge Kit. It can be easily put in line with the quick connect ends and used to monitor/set/test your pressure washer
Specifications:• Accurately view pressure for all units up to 4,000 PSI• Casing: 2-1/2" Diameter• Window: Acrylic• Case Material: Stainless steel• Fill Material: Glycerin (liquid)• 3/8 Quick connects for easy mounting• Max. Pressure: 4,000 PSI• Weight: 0.80 lbs
Kit Components:• 4,000 PSI 2.5” stainless steel pressure gauge• 4,000 PSI Brass and stainless steel 3/8” quick disconnect gauge fitting• Note: Assembly with Teflon tape is required
Propulse Commercial Clean 4,000 PSI 3/8" x 50' Black Rubber Hose with Quick-Connect Couplers. Rubber construction throughout, with a single layer of steel wire braid, the hose of choice for manufacturers of commercial duty pressure washers
ProPulse, a Schieffer Company, backed by more than 90 years of innovation
Features: • Assembled in USA with high quality components • Suitable for commercial pressure cleaning applications • Rubber construction throughout• Reinforcement: One layer of high tensile braided steel – R1 Rating• Cover: Wrapped finish with embossed lay line• Burst (Minimum): 3:1 working pressure • Impulse Life: 200,000+
Specifications: • Hose Inner Diameter: 3/8" ID• Length: 50’• Working (Maximum): Up to 4,000 PSI• Burst (Minimum): 12,000 PSI• Color: Black• Maximum Temperature: 250° F.• Ends: 3/8" Quick Connect couplers ( 1 steel plug & 1 brass socket)• Permanent heavy duty black bend restrictors on both ends• Weight 9.6 lbs
Copyright © 2023 PWMall.com. All Rights Reserved.