We accept

Checkout

0
Picture of 65º x #10 Brass H-U 1/4" (M) VeeJet® Spray Nozzle

65º x #10 Brass H-U 1/4" (M) VeeJet® Spray Nozzle

SKU: H1/4U-6510

Brand: Spraying Systems Co.

10 in stock

$2.59

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Spraying Systems 65º Brass H-U 1/4" (M) VeeJet® Spray Nozzle. As the liquid exits through the sharp V shape cut of the orifice, it forms into a flat spray pattern. The distribution is tapered from the center of the spray


Features
• Flat fan type, tapered edge spray pattern
• Consistent performance over the industry's largest range of flow rates and pressures
• One-piece design
• Uniform spray distribution with flow rates from .012 to 1237 gpm
• Operating pressures up to 500 psi

TECHNICAL DATA SHEET


Specifications
• Spray Angle: 65º
• Capacity Size: 10
• Operating Pressure: Up to 500 PSI
• Material: Brass
• Inlet Connection: 1/4" Male thread
• Length: 1.0”
• Hex: 9/16”
• Net Weight: 0.8 Oz

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

3/8" x 2' Grey 6,000 PSI Pressure Washer Jumper Hose

SKU: 9895B9024

Propulse 6,000 PSI Grey “mark-less” 2' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.


Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 2’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.00 lbs

  Price: $11.40

CLEANSTREAM 4,000 PSI 3/8" x 100' Grey Non-Marring Hose

SKU: 489400009

ProPulse™ CLEANSTREAM™ 4,000 PSI 3/8" x 100' Grey Non-Marring Pressure Washer Hose. Wire braided pressure washer hose has not changed much in more than 50 years. ProPulse™ is proud to introduce this revolutionary, new and application specific solution for the most demanding high performance cold water hose. Exclusive to ProPulse, this patent pending product is ideally suited for cold water paint and flat surface preparation, commercial car cleaning, agricultural cleaning and a whole lot more! NOT FOR HOT WATER OR STEAM


Features:
• Light weight
• Highly flexible
• True non-marking, abrasion and chemical resistant
• Easy to clean
• Matte finish, feels like rubber


MADE IN USA
Every foot of ProPulse™ CLEANSTREAM™ is designed, engineered and manufactured in the USA, assembled using imported and/or domestic end fittings

Hose Construction
• Inner Tube: Water and chemical resistant polyester and polyurethane
• Reinforcement: One layer of high tensile steel braid
• Cover: Matte finish TPU provides a lower coefficient of friction
• Laminated: Bonded construction for long life

Specifications:
• Hose: 3/8” ID x100’ Long
• Working Pressure: 4,000 PSI
• Burst Pressure: 12,000 PSI
• Color: Grey
• Max. Water Temperature: 140° F.
• Ends: 3/8" Male NPT (1 solid & 1 swivel)
• Black bend restrictors on both ends
• Weight 17.25 lbs

  Price: $107.22

3/8" FPT High Pressure 3-Way Ball Valve 7,250 PSI

SKU: 8402.2615.00


Comet 3/8" FPT High Pressure Shut-Off 3-Way Ball Valve 7,250 PSI


Specifications:
• Zinc plated steel body
• Chrome plated steel ball
• Max Pressure: 7,250 PSI
• Max Temperature: 212º F
• Ports: 3/8" FNPT x 3/8" FNPT x 3/8" FNPT
• Weight: 1.60 lbs

 

  Price: $63.49

QD Plug, SS 3/8 x 3/8 NPT-F 6,000 PSI

SKU: D10078


General Pump D10078 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-F 6,000 PSI


Features:
• Quick disconnect design
• 304 Stainless steel


Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: 304 Stainless steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Replaces QCP2FSS
• Weight: 0.09 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
  Price: $2.65